Connect The Server To The Lan - Dell S5000 Series Getting Started Manual
Servers for sap hana
Hide thumbs
Also See for S5000 Series:
- Installation and service manual (106 pages) ,
- Customer service manual (106 pages) ,
- Installation manual (66 pages)
Table of Contents
Advertisement
Connect the server to the LAN
About this task
NOTE:
On a S5408 server, only connecting the primary server module is required.
For each server module you wish to connect, perform the following steps:
Steps
1. Connect one RJ45 cable to the PEB or Phy Ethernet Board SFP+ (PEBS) port 0 at the rear of the primary server module.
Figure 5. Server module equipped with a PEB - rear view
Figure 6. Server module equipped with a PEBS - rear view
2. Connect the other end of the cable to the LAN.
Connecting the Server
9
Advertisement
Table of Contents
