Partitioning; Static Ip - Dell S5000 Series Getting Started Manual

NOTE: The default ports remain open on the primary server module. For example, if module 2 is a primary server module,
both telnet 24 and telnet 42024 will be accessible.
NOTE: The primary server module does not allow access to secondary server modules of other partitions.

Partitioning

Table 4. Partitioning settings
Server module
Primary
Secondary
Network traffic for the secondary server modules:
● Outgoing traffic: from the secondary server module
● Incoming traffic: from the secondary server module or through the primary server module

Static IP

Table 5. Static IP settings
Server module
Primary
Secondary
Network traffic for the secondary server modules:
● Outgoing traffic: from the secondary server module
● Incoming traffic: from the secondary server module or through the primary server module
18 Managing Network Configuration
LAN cable
Connected
Connected
LAN cable
Connected
Connected
Network access
DHCP or static IP
DHCP
Network access
DHCP or static IP
Static IP