Wiring; Commissioning; Programming The Rts Transmitter; Checking The Rotation Direction - SOMFY Cord Lift 32 RTS Installation Manual

4. WIRING

Plug the battery with the motor supply
cable.
Warning: Do not unplug the battery
when the motor works.

5. COMMISSIONING

5.1. Programming the RTS transmitter

Press the UP and DOWN buttons
simultaneously on the RTS transmitter:
the shade jogs and the control point is
preprogrammed in the motor

5.2. Checking the rotation direction

Press the RTS transmitter UP button:
a) If the shade raises (a), the rotation
direction is correct: move to the section
entitled 5.3 «Adjusting the end limits».
b) If the shade is lowers (b), the rotation
direction is incorrect: move to the next
step.
b1) Press the RTS transmitter MY
button until the shade jogs: the
rotation direction has been modified.
b2) Press the RTS transmitter UP
button to check the rotation direction.
6
b1
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
a
=
b
=
b2