Table of Contents
Advertisement
make sure there are no leakages and spills on engine parts when refuelling. If they happen
to occur, dry out the stained parts or wait until the petrol evaporates.
When the machine is in operation, all other persons (children in particular) and animals
have to be outside the machine's working space. The machine operator can continue
working only after they have been shown out to a safe distance (see Pictograph 6).
NOTE: The outer safety zone A around the inner working zone B is specified in standards
EN 12733 and CSN EN 12733. Entry into the working zone is to be prevented by using
appropriate prohibitory signs. The distance between the individual sides of zones A and B
must not be less than 50 m. Should the dangerous zone of machine operation be entered by a
person or animal, the machine operator must release the cutting implement drive lever
without any delay and wait with the further work until the zone is clear again.
Removal of any protective equipment and casings from the machine is forbidden.
The safe slope accessibility of the machine is 10°. Maximum inclination of the engine at
work is 20° for a long-time operation and 30° for a shorter time (up to 1 minute).
NOTE: The machine should be preferably not used on wet grass. The terrain you are moving
on must be always safe. Do the work while walking not running. Be particularly careful
when changing direction on the slope. Cutting on steeply inclined slopes should be
prevented. If you fall, do not hold the machine but rather release your grip on it.
All kinds of the machine repair, adjustment, lubrication and cleaning are to be made with
the machine switched off and spark plug cable disconnected.
3.2 Declared and guaranteed noise and vibration values.
Declared emission level of acoustic pressure A at operator's site L
CSN EN 836+A1/A2, Attachment H and CSN EN ISO 11 201).
Guaranteed level of acoustic performance of the machine L
9/2002 Gaz.)
Declared sum of accelerated vibrations transmitted onto operator's hands-arms
-2
a
= 7,9 + 3,1 [m.s
hv
3.3 Safety pictographs.
The user is obliged to maintain the pictographs on the machine legible and to provide for their
replacement in the case of damage.
Pictograph No.
1
2
3
4
5
6
7
8
9
10
11
12
6
] (according to CSN EN 836+A1/A2, Attachment G and CSN EN 1033).
Safety information-Description
Label with data of manufacture
Guaranteed level of machine's acoustic performance
Instructions for use to be studied prior to machine operation
During the machine maintenance, the conductor is to be disconnected from the spark
plug
Putting one's hands or feet into the cutting disk working space is prohibited – Danger
of injury
Entry forbidden for other persons and animals. Minimum safe distance from the
machine
Danger of injury by flying off material fragments and flung objects. Other persons and
animals to be kept at a safe distance from the machine
Arrow for the direction of tool rotation – to the right
Putting one's hands into the V-belt space should be avoided – Danger of squeezed
limbs
Adhere to a maximum allowed-safe slope accessibility of the machine
Cutting disk drive switch. 0= cutting disk does not turn, 1= cutting disk turns
Machine travel switch. 0 = machine stands still , 1 = machine travels
BDR-595 GMI Adela 190
= 85 dB (according to
pAeq,T
= 98 dB (according to NV No.
WA
Advertisement
Table of Contents
