Table of Contents
Advertisement
No. 185/2001 Gaz. (and its amendments) and with respect to the decrees of local town or
municipal authorities.
The following procedure is recommended for machine disposal after the end of its service
life:
1. Dismount all parts from the machine that can still be used.
2. Dismount plastic machine parts and parts made of non-ferrous metals. The dismantled
machine remainder and the dismounted parts are to be disposed according to Waste Law
No. 185/2001 Gaz. (and its possible amendments) and with respect to the decrees of local
town or municipal authorities.
7 Instructions for ordering spare parts.
The following data are to be used for an easier identification when ordering the spare
parts:
1. Machine type, engine type, machine serial number and year of manufacture;
2. Ordering number given by manufacturer and its name in the part list;
3. Number of ordered pieces separately for each item;
4. Precise address, telephone number, fax number or e-mail address;
5. Should you be uncertain about the correct identification of the component, send the
damaged component either to the nearest service shop or directly to the manufacturer;
6. All components should be ordered in the nearest service shop or at your dealer's.
In the case of any confusions concerning the spare parts or technical issues, the VARI a.s.
commercial, customer-service or technical departments are prepared to answer all your
inquiries.
8 Contact to manufacturer:
VARI,a.s.
Opolanská 350
Libice nad Cidlinou
CZECH REPUBLIC
289 07
9 List of components.
24
Telephone:
(+420) 325 607 111
Fax:
(+420) 325 607 264
(+420) 325 637 550
E-Mail:
vari@vari.cz
Internet:
http://www.vari.cz/
http://techweb.vari.cz
BDR-595 GMI Adela 190
Advertisement
Table of Contents
