Mounting The 2706-P42C2-Sc And 2706-P44C2-Sc Displays - Spectrum Controls 2706-P4 C2-SC Series Installation Instructions Manual

16

Mounting the 2706-P42C2-SC and 2706-P44C2-SC Displays

Sign installation must be performed by qualified personnel. Wall mounting brackets and fasteners
are provided with the display. Hardware to fasten the display to the wall or ceiling is not provided as
the appropriate fasteners must be used for brick, stone, or wood etc.
NOTE
Wall mount brackets dimensions are as follows:
Spectrum Controls, Inc. Publication 0100290-01A
Installing InView Marquee 2706-P4xC2-SC Message Displays
12. If needed, re-enter the IP address in the Browser.
13. The InView User Interface software starts up and provides you
with a login screen. Enter the default password:
spectrum
The main InView User Interface View window appears.
14. Use the online help to finish setting up your InView and display.
15. Follow directions. If needed, click Help button for specific
instructions:
If you use the equipment in a manner not specified by Spectrum
Controls, Inc. may impair the protection provided by the
equipment.
The factory-applied finish is must not be altered or changed.
Mount the sign so that it is easy to disconnect power when
servicing.
Always disconnect the communications cable(s) before
disconnecting power.
Modifying the sign housing voids the warranty.
Mounting Displays on a Wall
PN: 1778600501