SATO e Series Service Manual page 64

Section 2. Configuration
LCD Panel — Hex Dump Mode
In addition to the User Test Print Labels, the printer can print the contents of the receive
buffer in a hexadecimal format to allow the data stream to be examined for errors and
troubleshooting.
STEP
1.
2.
3.
4.
PN 9001098
Rev. A
2-40
PROCEDURE
To enter the Hex Dump mode, place DSW2-4 in the ON position and
power on the printer.
Send the data stream to the printer.
The receive data will be printed in a hexadecimal format.
To return the printer to normal position, place DSW2-4 in the OFF
position and power off the printer, then back on.
SATO M-10e TT/DT Printers Service Manual