1. Manuals
  2. Brands
  3. Landoll Manuals
  4. Tiller
  5. 9650 FC
  6. Operator's manual

Landoll 9650 FC Operator's Manual

Field cultivator
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model 9650
Field Cultivator
Operator's Manual
LANDOLL COMPANY, LLC
1900 North Street
Marysville, Kansas 66508
(785) 562-5381
800-428-5655 ~ WWW.LANDOLL.COM
F-605-0221
02/2021-Present

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9650 FC and is the answer not in the manual?

Questions and answers

Related Manuals for Landoll 9650 FC

Summary of Contents for Landoll 9650 FC

  • Page 1 Model 9650 Field Cultivator Operator’s Manual LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM F-605-0221 02/2021-Present...
  • Page 2 Manuals for the 9650 FC MANUAL NUMBER MANUAL NAME F-605 9650 FC Operator’s Manual F-606 9650 FC Parts Manual...

  • Page 3: Table Of Contents

    Table of Contents Introduction and Safety Information Understanding Safety Statements ..........1-2 Decal Safety .
  • Page 4 Spring Shank ............. 4-9 Sweeps .

  • Page 5: Introduction And Safety Information

    Introduction and Safety Information Introduction The Landoll Model 9650 Field Cultivator is a quality product designed to give years of trouble free performance. By following each section of this manual, your system will perform as designed for you and your operation.

  • Page 6: Understanding Safety Statements

    INTRODUCTION AND SAFETY INFORMATION Understanding Safety Decal Safety Statements 1. Examine safety decals and be sure you have the correct safety decals for the implement. You will find various types of safety information on the 2. Keep these signs clean so they can be observed following pages and on the machine signs (decals) readily.

  • Page 7: Attaching, Detaching, And Storage

    INTRODUCTION AND SAFETY INFORMATION 5. Use a locking-style hitch pin that properly fits the 4. Block the implement so it will not roll when working tractor drawbar and the implement hitch. Lock the on or under it to prevent injury. tractor drawbar in the center position to prevent loss 5.

  • Page 8: Tire Safety

    INTRODUCTION AND SAFETY INFORMATION Tire Safety Safety Chain 1. Tire changing can be dangerous and should be 1. Use a chain with a strength rating equal to or greater performed by trained personnel using correct tools than the gross weight of towed machinery, which is and equipment.

  • Page 9: Standard Specifications

    Chapter 2 Standard Specifications Model Specifications 9650 Field Cultivator Model Number 9650-38 9650-42 9650-46 9650-50 Working Width 38'-6” 42'-6” 44'-6” 50'-6” Transport Width 17'-4” 17'-4” 17'-4” 17'-4” Transport Height 11'-11” 11'-11” 13'-11” 13'-11” Number of Shanks Shanks per Section 10-15-27-15-10 14-15-27-15-14 14-19-27-19-14 18-19-27-19-18...

  • Page 10: General Torque Specifications (Rev. 4/97)

    STANDARD SPECIFICATIONS General Torque Specifications (rev. 4/97) TORQUE SPECIFIED IN FOOT POUNDS - This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition).

  • Page 11: Hydraulic Fitting Torque Specifications

    STANDARD SPECIFICATIONS Hydraulic Fitting Torque Specifications TORQUE IS SPECIFIED IN FOOT POUNDS- 37 JIC, ORS, & ORB (REV. 10/97) This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition).
  • Page 12 STANDARD SPECIFICATIONS Figure 2-1: Shank Placement (38’ and 42' Models) (Main Frame) F-605-0221...
  • Page 13 STANDARD SPECIFICATIONS Figure 2-2: Shank Placement (38’ and 42' Models) (Right Wings Shown)
  • Page 14 STANDARD SPECIFICATIONS Figure 2-3: Shank Placement (46' and 50’ Models) (Main Frame) F-605-0221...
  • Page 15 STANDARD SPECIFICATIONS Figure 2-4: Shank Placement (46’ and 50' Models) (Right Wings Shown)
  • Page 16 STANDARD SPECIFICATIONS 13-1/2 13-1/2 16-3/4 16-3/4 Figure 2-5: Light Bracket Placement (All Models) F-605-0221...
  • Page 17 STANDARD SPECIFICATIONS Figure 2-6: Front Gauge Wheel Placement...
  • Page 18 STANDARD SPECIFICATIONS 13” 3-1/4” 18” 4” 5-1/4” 14-13/16” 2-1/4” 9-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 8 INCH 6 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-7: 4 Row CT Harrow Placement 9650-38’ LH 2-10 F-605-0221...
  • Page 19 STANDARD SPECIFICATIONS 20” 20” 4-1/4” 7-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 9 TINE 8 INCH HARROW ASSEMBLY Figure 2-8: 4 Row CT Harrow Placement 9650-38’ CENTER 2-11...
  • Page 20 STANDARD SPECIFICATIONS 4” 16” 3-1/4” 13” 3-7/16” 11-5/8” 8-7/16” 6-1/4” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 5 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-9: 4 Row CT Harrow Placement 9650-38’ RH 2-12 F-605-0221...
  • Page 21 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-13...
  • Page 22 STANDARD SPECIFICATIONS 5” 3-1/4” 13” 8” 9-1/4” 6-13/16” 5-1/4” 5-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 6 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-10: 4 Row CT Harrow Placement 9650-42’ LH 2-14 F-605-0221...
  • Page 23 STANDARD SPECIFICATIONS 13” 13” 5-1/4” 8-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 8 INCH HARROW ASSEMBLY Figure 2-11: 4 Row CT Harrow Placement 9650-42’ CENTER 2-15...
  • Page 24 STANDARD SPECIFICATIONS 8” 13” 3-1/4” 5” 2-1/4” 8-7/16” 3-5/8” 12-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 6TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-12: 4 Row CT Harrow Placement 9650-42’ RH 2-16 F-605-0221...
  • Page 25 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-17...
  • Page 26 STANDARD SPECIFICATIONS 19” 5” 20” 8” 10-7/16” 4-1/4” 3-1/4” 5-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 7 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-13: 4 Row CT Harrow Placement 9650-46’ LH 2-18 F-605-0221...
  • Page 27 STANDARD SPECIFICATIONS 13” 13” 5-1/4” 8-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 8 INCH HARROW ASSEMBLY Figure 2-14: 4 Row CT Harrow Placement 9650-46’ CENTER 2-19...
  • Page 28 STANDARD SPECIFICATIONS 8” 20” 5” 19” 2-1/4” 7-7/16” 7-1/4” 6-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 8 INCH 6 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-15: 4 Row CT Harrow Placement 9650-46’ RH 2-20 F-605-0221...
  • Page 29 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-21...
  • Page 30 STANDARD SPECIFICATIONS 5” 5” 20” 8” 9-1/4” 10-7/16” 4-1/4” 5-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 8 INCH 7 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-16: 4 Row CT Harrow Placement 9650-50 LH 2-22 F-605-0221...
  • Page 31 STANDARD SPECIFICATIONS 8” 13” 13” 8” 5-7/16” 5-1/4” 8-7/16” 2-1/4” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 8 INCH HARROW ASSEMBLY Figure 2-17: 4 Row CT Harrow Placement 9650-50’ CENTER 2-23...
  • Page 32 STANDARD SPECIFICATIONS 8” 20” 5” 5” 2-1/4” 7-7/16” 7-1/4” 12-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 8 INCH 8 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-18: 4 Row CT Harrow Placement 9650-50’ RH 2-24 F-605-0221...
  • Page 33 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-25...
  • Page 34 STANDARD SPECIFICATIONS 12-7/8” 12-3/4” 3-1/4” 3-1/2” 6-5/8” 6-3/4” 5” 4-1/4” 19-5/8” 23-3/8” 13-7/8” 10-1/8” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 4 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 60” REEL ASSEMBLY 90”...
  • Page 35 STANDARD SPECIFICATIONS 3-1/4” 8-1/4” 8-1/4” 3-1/4” 7-1/2” 5” 4” 5-1/8” 11-3/4” 13-1/2” 13-5/8” 11-5/8” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 75”...
  • Page 36 STANDARD SPECIFICATIONS 3-1/2” 3-1/4” 12-3/4” 12-7/8” 4-3/8” 5-1/8” 6-5/8” 6-3/4” 10-1/4” 13-3/4” 23-1/2” 19-1/2” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 3 ROW 4 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 60”...
  • Page 37 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-29...
  • Page 38 STANDARD SPECIFICATIONS 3-1/4” 3-1/4” 19” 19” 13-1/4” 13” 4-3/4” 6-7/8” 32-1/2” 21-3/8” 22-1/8” 18-1/8” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 3 ROW 5 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 75”...
  • Page 39 STANDARD SPECIFICATIONS 3-1/4” 8-1/4” 8-1/4” 3-1/4” 7-1/2” 5” 4” 5-1/8” 19-1/4” 6” 21” 19-1/4” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90”...
  • Page 40 STANDARD SPECIFICATIONS 19” 19” 3-1/4” 3-1/4” 13-1/8” 4-7/8” 13-1/8” 6-3/4” 18-1/8” 22-1/8” 21-3/8” 32-1/2” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90”...
  • Page 41 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-33...
  • Page 42 STANDARD SPECIFICATIONS 3-1/4” 6” 19” 9” 6-5/8” 9-7/8” 4-3/4” 4-7/8” 7” 19-1/2” 20-5/8” 15-5/8” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 105”...
  • Page 43 STANDARD SPECIFICATIONS 13” 8-1/4” 8-1/4” 13” 6-3/4” 6-7/8” 21-1/2” 13-1/2” 13-1/2” 21-5/8” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 3 ROW HARROW ASSEMBLY 75” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-26: 3 Row Tine & Reel Placement 9650-46’ CENTER 2-35...
  • Page 44 STANDARD SPECIFICATIONS 9” 19” 6” 3-1/4” 4-7/8” 4-3/4” 9-3/4” 6-1/2” 15-5/8” 20-5/8” 19-1/2” 7” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 90”...
  • Page 45 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-37...
  • Page 46 STANDARD SPECIFICATIONS 3-1/4” 9” 13” 19” 13” 4-7/8” 6-3/4” 6-7/8” 29-1/2” 15” 22-1/8” 18-1/8” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 105”...
  • Page 47 STANDARD SPECIFICATIONS 3-1/4” 8-1/4” 8-1/4” 3-1/4” 5” 4” 7-1/2” 5-1/8” 19-1/4” 6” 21” 19-1/4” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90”...
  • Page 48 STANDARD SPECIFICATIONS 19” 13” 9” 3-1/4” 6-3/4” 6-7/8” 4-3/4” 13-1/8” 18-1/8” 22-1/8” 15” 29-1/2” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 105”...
  • Page 49 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-41...
  • Page 50 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 3-5/8” 2-1/4” 2-3/4” 6” 11TH HOLE 9TH HOLE 10TH HOLE 10TH HOLE 9TH HOLE...
  • Page 51 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 9-13/16” 18-3/4” 3-1/4” 8TH HOLE 4TH HOLE 8TH HOLE 4TH HOLE 6TH HOLE 6TH HOLE 6TH HOLE 6TH HOLE...
  • Page 52 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 6” 2-3/4” 2-1/4” 3-5/8” 14TH HOLE 6TH HOLE 13TH HOLE 7TH HOLE 12TH HOLE...
  • Page 53 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-45...
  • Page 54 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 8-13/16” 2-1/16” 2-3/4” 7-3/4” 13TH HOLE 9TH HOLE 10TH HOLE 11TH HOLE 11TH HOLE...
  • Page 55 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 8” 18-3/4” 3-1/4” 3-1/4” 8TH HOLE 5TH HOLE 8TH HOLE 4TH HOLE 6TH HOLE 7TH HOLE 6TH HOLE 6TH HOLE...
  • Page 56 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 7-3/4” 2-3/4” 2-1/16” 8-13/16” 15TH HOLE 6TH HOLE 13TH HOLE 9TH HOLE 13TH HOLE...
  • Page 57 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-49...
  • Page 58 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 3” 4” 3-3/8” 6” 9TH HOLE 10TH HOLE 7TH HOLE 10TH HOLE 5TH HOLE...
  • Page 59 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8” 18-3/4” 3-1/4” 8TH HOLE 5TH HOLE 8TH HOLE 4TH HOLE 6TH HOLE 7TH HOLE 6TH HOLE 6TH HOLE...
  • Page 60 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 6” 3-3/8” 4” 3” 14TH HOLE 3RD HOLE 14TH HOLE 5TH HOLE 12TH HOLE...
  • Page 61 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-53...
  • Page 62 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 9-3/8” 4” 3-3/8” 6” 11TH HOLE 10TH HOLE 7TH HOLE 10TH HOLE 9TH HOLE...
  • Page 63 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8” 18-3/4” 3-1/4” 8TH HOLE 5TH HOLE 8TH HOLE 4TH HOLE 6TH HOLE 7TH HOLE 6TH HOLE 6TH HOLE...
  • Page 64 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 6” 3-3/8” 4” 9-3/8” 14TH HOLE 3RD HOLE 14TH HOLE 7TH HOLE 12TH HOLE...
  • Page 65 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-57...
  • Page 66 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 3-1/4” 3-1/4” 3-1/4” 5-1/8” 8TH HOLE 7TH HOLE 13TH HOLE 7TH HOLE 6TH HOLE...
  • Page 67 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8-7/8” 8-7/8” 3-1/4” 11TH HOLE 6TH HOLE 10TH HOLE 7TH HOLE 9TH HOLE 8TH HOLE 8TH HOLE 9TH HOLE...
  • Page 68 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 5-1/8” 3-1/4” 3-1/4” 3-1/4” 11TH HOLE 9TH HOLE 4TH HOLE 11TH HOLE 9TH HOLE...
  • Page 69 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-61...
  • Page 70 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 8-7/8” 3-1/4” 3-1/4” 6-1/4” 10TH HOLE 13TH HOLE 10TH HOLE 5TH HOLE 12TH HOLE...
  • Page 71 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8” 18-3/4” 3-1/4” 8TH HOLE 9TH HOLE 13TH HOLE 5TH HOLE 11TH HOLE 7TH HOLE 6TH HOLE 11TH HOLE...
  • Page 72 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 6” 3-1/4” 3-1/4” 8-7/8” 9TH HOLE 6TH HOLE 14TH HOLE 9TH HOLE 7TH HOLE...
  • Page 73 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-65...
  • Page 74 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 12-7/8” 4-7/8” 13-1/4” 9-1/8” 6-7/8” 12TH HOLE 8TH HOLE 15TH HOLE 8TH HOLE...
  • Page 75 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8-7/8” 8-7/8” 3-1/4” 10TH HOLE 7TH HOLE 11TH HOLE 6TH HOLE 8TH HOLE 9TH HOLE 9TH HOLE 8TH HOLE...
  • Page 76 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 6-7/8” 9-1/8” 13-1/4” 4-7/8” 12-7/8” 12TH HOLE 11TH HOLE 12TH HOLE 8TH HOLE...
  • Page 77 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-69...
  • Page 78 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 5-3/4” 5-3/4” 5-3/4” 3-1/4” 8-3/16” 6” 13TH HOLE 6TH HOLE 12TH HOLE 5TH HOLE...
  • Page 79 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8” 18-3/4” 3-1/4” 13TH HOLE 5TH HOLE 8TH HOLE 9TH HOLE 11TH HOLE 7TH HOLE 6TH HOLE 11TH HOLE...
  • Page 80 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 6” 8-7/16” 3-1/4” 5-3/4” 5-3/4” 9TH HOLE 8TH HOLE 10TH HOLE 9TH HOLE...
  • Page 81 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-73...
  • Page 82 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 3-1/8” 3-1/8” 3-1/4” 4-1/8” 12TH HOLE 7TH HOLE 7TH HOLE 8TH HOLE 10TH HOLE...
  • Page 83 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8-7/8” 8-7/8” 3-1/4” 10TH HOLE 7TH HOLE 11TH HOLE 6TH HOLE 8TH HOLE 9TH HOLE 9TH HOLE 8TH HOLE...
  • Page 84 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 4-1/8” 3-1/4” 3-1/8” 3-1/8” 11TH HOLE 8TH HOLE 12TH HOLE 3RD HOLE 9TH HOLE...
  • Page 85 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-77...
  • Page 86 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 8-3/4” 3-1/8” 3” 6” 10TH HOLE 5TH HOLE 13TH HOLE 10TH HOLE 8TH HOLE...
  • Page 87 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8-3/8” 8-3/8” 3-1/4” 13TH HOLE 5TH HOLE 14TH HOLE 9TH HOLE 11TH HOLE 7TH HOLE 12TH HOLE 11TH HOLE...
  • Page 88 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 6” 3” 3-1/8” 8-3/4” 14TH HOLE 9TH HOLE 9TH HOLE 6TH HOLE 12TH HOLE...
  • Page 89 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-81...
  • Page 90 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 13-1/8” 4-7/8” 14-1/4” 8-5/16” 5-7/8” 11TH HOLE 9TH HOLE 15TH HOLE 8TH HOLE...
  • Page 91 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8-7/8” 8-7/8” 3-1/4” 10TH HOLE 7TH HOLE 11TH HOLE 6TH HOLE 8TH HOLE 9TH HOLE 9TH HOLE 8TH HOLE...
  • Page 92 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 5-7/8” 8-5/16” 14-1/4” 4-7/8” 13-1/8” 12TH HOLE 11TH HOLE 13TH HOLE 7TH HOLE...
  • Page 93 STANDARD SPECIFICATIONS Table provided for general use. NOTES: 2-85...
  • Page 94 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 5-5/8” 5-5/8” 3-1/8” 9-3/16” 5” 11TH HOLE 5TH HOLE 12TH HOLE 7TH HOLE...
  • Page 95 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8-3/8” 8-3/8” 3-1/4” 13TH HOLE 5TH HOLE 14TH HOLE 9TH HOLE 11TH HOLE 7TH HOLE 12TH HOLE 11TH HOLE...
  • Page 96 STANDARD SPECIFICATIONS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. CATCH TRAYS POINT INWARD, HOOKS POINT OUTWARD. 5” 9-3/16” 3-1/8” 5-5/8” 5-5/8” 9TH HOLE 7TH HOLE 11TH HOLE 8TH HOLE...
  • Page 97 Chapter 3 Assembly Instructions It is very important that your new 9650 Field Cultivator be  WARNING properly assembled, adjusted and lubricated before use. Illustrations in this section show proper assembly Do not attempt to lift heavy parts (such as the procedures.
  • Page 98 ASSEMBLY INSTRUCTIONS Center Frame Assembly- 13. Install a 90 deg elbow in the back side (opposite the button) of the depth control valve. Fasten the valve 9650-38’, 42’, 46’ & 50’ and fitting to the valve mount using 5/16x2 bolts and locknuts.
  • Page 99 ASSEMBLY INSTRUCTIONS WING RIGHT STABILIZER CENTER FRAME FRONT 1-3/4 NUTS CYLINDER REAR THREADED MOUNT CYLINDER 5/8 X 2 BOLTS MOUNT & LOCKNUTS 3/4 X 3 BOLT U-BOLT DEPTH CONTROL & LOCKNUT MOUNT LIFT 4 X 10 CYLINDER 1 X 3-1/2 BOLT &...
  • Page 100 ASSEMBLY INSTRUCTIONS Hitch Assembly 6. Slide the hose holder bracket over the screw and secure with another 3/4 prevailing torque flange nut. 7. Install a 3/8-16 x 3-1/2 all-thread screw in the front of IMPORTANT the hose holder bracket and secure with a 3/8-16 hex Read all safety precautions at the front of the section nut.
  • Page 101 ASSEMBLY INSTRUCTIONS Figure 3-2: Frame and Hitch Assembly...
  • Page 102 ASSEMBLY INSTRUCTIONS Leveling Linkage Assembly NOTE If installing optional rear tow hitch, see “Rear Tow Hitch IMPORTANT (Option)” on page 3-32. Install rear tow hitch before Read all safety precautions at the front of the section connecting leveler tube. before attempting any of the following procedures. 1.
  • Page 103 ASSEMBLY INSTRUCTIONS Figure 3-3: Leveling Linkage Assembly...
  • Page 104 ASSEMBLY INSTRUCTIONS Inner Wing Frames Wing Lift Tire Installation 1. Attach inner wing frames to center frame using 1-1/4 1. All lifts and hubs come already assembled from the flange bearings, flat washers, fold pin, and 5/16 x factory. 2-1/2 spring slotted pins See Figure 3-4.
  • Page 105 ASSEMBLY INSTRUCTIONS CENTER FRAME AND HITCH ASSEMBLY SEE DETAIL RIGHT INNER WING ASSEMBLY SEE DETAIL SEE DETAIL 1-1/4N FLAT WASHER 1-1/4 FLANGE BEARING FOLD PIN 5/16 X 2-1/2 SPRING SLOTTED RIGHT OUTER WING ASSEMBLY 280/70 R15 CENTER TIRE AND FRAME WHEEL ASSEMBLY INNER...
  • Page 106 ASSEMBLY INSTRUCTIONS Figure 3-5: Lighting and SMV Bracket Installation (Prior to August, 2013) 3-10 F-605-0221...
  • Page 107 ASSEMBLY INSTRUCTIONS Figure 3-6: Lighting and SMV Bracket Installation (Prior to August, 2013) Lighting and SMV Bracket 4. Attach single amber lamp to each light mount using 1/4-20 x 1 hex head cap screws and hex lock nuts. Installation (Prior to August, 5.
  • Page 108 ASSEMBLY INSTRUCTIONS Figure 3-7: LED Light and SMV Bracket Installation (After August, 2013) 3-12 F-605-0221...
  • Page 109 ASSEMBLY INSTRUCTIONS Figure 3-8: LED Light and SMV Harness Wire Designations (After August, 2013) LED Light and SMV Bracket 8. Install the stor-away holder to hose holder on hitch with 1/4-20 x 1 hex head cap screws and hex lock Installation (After August, 2013) nuts.
  • Page 110 ASSEMBLY INSTRUCTIONS Hydraulic Installation 5. Install 90 degree regular adapter fittings in both ends of all lift cylinders (4 x 10, 3-3/4 x 10, and 3-1/2 x 10) See Figures 3-13 3-10 NOTES 6. Install base end of lift cylinders (4 x 10, 3-3/4 x 10, See Figures 3-11 through 3-14...
  • Page 111 ASSEMBLY INSTRUCTIONS 13. Install lift system hoses per Figure 3-11 (9650-38 14. Install fold system hoses per Figure 3-12 (9650-38 and 9650-42) or Figure 3-13 (9650-46 and and 9650-42) or Figure 3-14 (9650-46 and 9650-50.) Wrap lift system hoses with blue hose 9650-50.) Wrap fold system hoses with yellow hose wrap.
  • Page 112 ASSEMBLY INSTRUCTIONS Figure 3-11: Hydraulic Lift Installation (9650-38 & 9650-42) 3-16 F-605-0221...
  • Page 113 ASSEMBLY INSTRUCTIONS Figure 3-12: Hydraulic Fold Installation (9650-38 & 9650-42) 3-17...
  • Page 114 ASSEMBLY INSTRUCTIONS Figure 3-13: Hydraulic Lift Installation (9650-46 & 9650-50) 3-18 F-605-0221...
  • Page 115 ASSEMBLY INSTRUCTIONS Figure 3-14: Hydraulic Fold Installation (9650-46 & 9650-50) 3-19...
  • Page 116 ASSEMBLY INSTRUCTIONS 1-1/4-7 HEX LOCK NUT 4 X 16 HYDRAULIC CYLINDER 1-1/4-7 X 7 HEX HEAD CAP SCREW WING EXTENSION CLEVIS AND ROLL PINS PROVIDED ROLLER W/ CYLINDER 3-3/4 X 10 HYDRAULIC CYLINDER 1-1/4N FLAT WASHER 4-1/2 X 30 HYDRAULIC CYLINDER 3-1/2 X 10 HYDRAULIC 1-1/4N FLAT WASHER CYLINDER...
  • Page 117 ASSEMBLY INSTRUCTIONS Table provided for general use. NOTES: 3-21...
  • Page 118 ASSEMBLY INSTRUCTIONS Shank Installation NOTE See Figure 2-2 through for shank placement Spring shank assemblies with frame extensions (front dimensions. Verify that all shank clamps and extensions bar) are mounted reversed for narrower shipment. These are properly installed. shanks must be removed and turned forward for proper 1.
  • Page 119 ASSEMBLY INSTRUCTIONS SPRING SHANK ASSEMBLY 5/8 X 4-11/16 X 5-1/2 U-BOLT, 5/8 FLANGE LOCK NUT SPRING SHANK 1/2 X 3-1/4 BOLT, EXTENSION 1/2 LOCK NUT 5/8 X 4-11/16 X 4-3/4 U-BOLT, 5/8 FLANGE LOCK NUT 5/8 X 1-3/4 ROUND SHANK HEAD SQUARE NECK BOLT, 5/8 FLANGE 5/8 X 4-11/16 X 7-3/4...
  • Page 120 ASSEMBLY INSTRUCTIONS 4 Row Coil Tine Harrow 2. Assemble the coil tine assemblies to the harrow arms. Installation 3. Front row tines are assembled with the tines above Refer to See Figures 2-7 through 2-18 for 4 ow coil tine the stop bolts to prevent damage when shipping harrow placement.
  • Page 121 ASSEMBLY INSTRUCTIONS ANGLE ADJUSTMENT HARROW ADJUSTMENT PIN PLATE GANG BAR MORE LESS PLATE AGGRRESIVE AGGRRESIVE 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (INSTALL BOLT IN INNER BOTTOM HOLE) NOTE: REMVOVE STOP BOLTS AND ROTATE DOWN WITH STOP BOLTS ABOVE TINES 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (INSTALL BOLT IN INNER TOP HOLE)
  • Page 122 ASSEMBLY INSTRUCTIONS 3 Row Coil Tine and Reel Harrow 2. Attach the harrow tine assemblies in correct location with 5/8 spring u-bolts and 5/8 flange lock nuts. Installation 3. Attach reel assemblies to the reel arm assemblies See Figures 2-19 through 2-30 for 3 Row Coil Tine...
  • Page 123 ASSEMBLY INSTRUCTIONS 3/4 X 5-1/2 BOLT, HARROW MOUNTING PLATE, 3” CLAMP BUSHING, 3/4 LOCK NUT 3/4 X 5-1/2 BOLT, 3/4 LOCK NUT TINE & REEL ASSEMBLY REEL ASSEMBLY HARROW TINE ASSEMBLY 5/8 X 3-11/16 X 4-5/8 U-BOLT, 5/8 LOCK NUT Figure 3-19: 3 Row Coil Tine and Reel Harrow Installation 3-27...
  • Page 124 ASSEMBLY INSTRUCTIONS 5 Row Spike Harrow Installation NOTE See Figures 2-31 through 2-42 for 5 Row Spike Harrow See Figures 2-31 2-42 for 5 Row Spike Harrow placement dimensions. placement dimensions of spike harrow arms, spike bars, 1. Attach spike harrow arm assemblies and spike and usage of bar clamps or bar clamps w/ tabs.
  • Page 125 ASSEMBLY INSTRUCTIONS NOTE: SPIKE BAR ALIGNMENT RIGHT SIDE SHOWN SPIKE HARROW ARM ASSEMBLY 3/4-10 X 9 HEX HEAD CAP SCREW CATCH TRAY 1/2-13 X 1-1/4 HEX CAP SCREW 3/4-10 X 5 HEX HEAD CAP SCREW BAR CLAMP W/TABS LYNCH PIN 1/2-13 X 3 HEX HEAD CAP SCREW PULL CHAIN BRACKET...
  • Page 126 ASSEMBLY INSTRUCTIONS 3 Row Spike and Reel Harrow 7. Attach flat bar reels with angled blades as shown (See Figure 3-21) Installation See Figures 2-43 2-54 for 3 Row Spike and Reel Harrow or See Figures 2-55 2-66 3RSD & flat reel for placement dimensions in “Standard Specification”...
  • Page 127 ASSEMBLY INSTRUCTIONS NOTE: SPIKE BAR ALIGNMENT RIGHT SIDE SHOWN 3 RSD ARM ASSEMBLY 3 RSD ARM W/O SPRING ASSEMBLY 3/4 X 5-1/2 BOLT, W/SPRING HARROW MOUNTING PLATE, 3” CLAMP BUSHING, 3/4 LOCK NUT 3/4 X 5-1/2 BOLT, FLAT REEL 3/4 LOCK NUT ASSEMBLY CATCH TRAY HOOK...
  • Page 128 ASSEMBLY INSTRUCTIONS Rear Tow Hitch (Option) 6. Attach the front of the tow hitch assembly to the cultivator frame cross tubes using u-bolts and 1. Lower the field cultivator to the ground and place locknuts. supports under the front frame bar. 7.
  • Page 129 ASSEMBLY INSTRUCTIONS Figure 3-23: Rear Tow Hitch Installation 3-33...
  • Page 130 ASSEMBLY INSTRUCTIONS Table provided for general use. NOTES: 3-34 F-605-0221...
  • Page 131 Chapter 4 Operation and Maintenance   DANGER DANGER Never allow anyone to ride on the 9650 Field When transporting the unit, place cylinder Cultivator at any time. Allowing a person to ride lockouts in the transport lock position after fully on the machine can inflict serious personal injury extending the cylinders.
  • Page 132 OPERATION AND MAINTENANCE Hydraulic Lift System 1. The rephasing hydraulic lift system contains smaller wing frame cylinders plumbed in series with larger The Field Cultivator is equipped with a rephasing center frame cylinders. It is important that the hydraulic lift system to raise and lower the unit in the field. cylinders be connected in the proper series for the lift system to operate correctly.
  • Page 133 OPERATION AND MAINTENANCE Hydraulic Fold System 1. Be sure the fold system is fully charged with hydraulic oil before attempting to fold/unfold the unit. Air in the The Field Cultivator is equipped with a hydraulic fold system can allow uncontrolled dropping of the wing system to raise and lower the wing frames for narrow frames causing serious personal injury or machine transport.
  • Page 134 OPERATION AND MAINTENANCE 4. To fold/unfold the Field Cultivator, find a level area 6. Maintenance – Regularly check all hydraulic large enough to accommodate the machine when it components. Check for hoses that may have become is fully unfolded. The tractor should be stopped and worn or pinched.
  • Page 135 OPERATION AND MAINTENANCE Transporting 3. When towing in combination, the maximum equipment ground speed shall be limited to the 1. Check and follow all federal, state, and local lowest specified ground speed of any of the towed requirements before transporting the Field Cultivator. implements.
  • Page 136 OPERATION AND MAINTENANCE Tractor Preparation Leveling (Front-to-Rear) The Landoll 9650 Field Cultivator is designed to be pulled 1. The Field Cultivator hitch is fully adjustable for height by tractor equipped with a double lip or clevis type hitch. so the implement may be set to operate level from If your tractor is not equipped as such, you need to front-to-rear.
  • Page 137 OPERATION AND MAINTENANCE Leveling (Side to Side) 4. Measure the same distance on the wing frame. The wing frames are generally set 1” higher than the 1. Leveling the Field Cultivator side-to-side involves center frame due to difference in tire diameter. leveling the wing frames to the center frame.
  • Page 138 OPERATION AND MAINTENANCE Gauge Wheels Depth Stop Adjustment 1. The Field Cultivator is equipped with castering gauge 1. The operating depth of the Field Cultivator is wheels at the outer front corners of each wing. These controlled by a single-point depth stop. The stop is gauge wheels are used to limit depth of the wings, located at the center front of the machine and prevent gouging and buckling of wing frames.
  • Page 139 OPERATION AND MAINTENANCE LED Light Operation 3. When adjusting/assembling the spring assembly, tighten the upper spring bolt, but leave approximately 1. Attach the seven-pin plug to the socket at the rear of 1/8” gap above the spring jam nut See Figure 4-11.
  • Page 140 OPERATION AND MAINTENANCE Wheel Bearing Maintenance – Wheel Bearing Maintenance -- Non Triple-Lip Triple-Lip Wheel bearing maintenance should be performed at the Transport tires use a self-contained seal with multiple beginning of every season of use. Check the wheel lips. The seal fits tight on both the spindle and wheel hub. bearings periodically for excessive end play.
  • Page 141 OPERATION AND MAINTENANCE Lubrication 3. Wheel seals, when properly installed, will allow grease to pass without harm to seals. Regular 1. A proper maintenance schedule will insure a long lubrication will extend service life, particularly in operating life and peak performance. Performing the severe operating conditions.
  • Page 142 OPERATION AND MAINTENANCE 4 Row Coil Tine Harrow 2. In general tine harrows have better capabilities for handling more residue and wetter conditions. When Adjustments operating the coil tine harrow, a more vertical tine tooth angle will make the harrow more aggressive. A 1.
  • Page 143 OPERATION AND MAINTENANCE 1-8 HEX NUTS ANGLE ADJUSTMENT PLATE SPRING HARROW ADJUSTMENT PIN ASSEMBLY MORE LESS AGGRRESIVE AGGRRESIVE 1-1/32” 22” 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (PLACE BOLT IN INNER BOTTOM HOLE) 1/2 X 1-1/4 RD HEAD SQ GANG BAR NECK SCREW (PLACE BOLT IN INNER PLATE...
  • Page 144 OPERATION AND MAINTENANCE 3 Row Coil Tine and Reel 4. Each coil tine harrow may be adjusted for spring pressure as well See Figure 4-16. Raise the tine Adjustments harrow off the ground. Remove the clevis pin from the spring tube and install in a heavy or light setting 1.
  • Page 145 OPERATION AND MAINTENANCE SPRING ASSEMBLY MORE LESS 1-8 HEX NUTS AGGRRESIVE AGGRRESIVE 1/2” 21-3/4” REEL ASSEMBLY HEAVY CLEVIS PIN LIGHT HARROW ADJUSTMENT PIN CLEVIS PIN HARROW ADJUSTMENT PIN REEL 3 ROW COIL TINE ASSEMBLY ASSEMBLY HARROW ADJUSTMENT HOLES Figure 4-16: 3 Row Coil Tine and Reel Adjustments 4-15...
  • Page 146 OPERATION AND MAINTENANCE 5 Row Spike Harrow 2. For the most aggressive spike to action, install the harrow adjustment pin in the forward mounting hole Adjustments over each bar clamp for each spike bar Figure 4-17. This will position the spike teeth to be in 1.
  • Page 147 OPERATION AND MAINTENANCE LEAST MIDDLE MOST CARRYING CHAIN TOOTH ANGLE TOOTH ANGLE TOOTH ANGLE CLEVIS PIN FORWARD PULL CHAIN SPIKE BAR ASSEMBLY BAR CLAMP W/TABS CLEVIS PIN BAR CLAMP Figure 4-17: 5 Row Spike Harrow Adjustments 4-17...
  • Page 148 OPERATION AND MAINTENANCE 3 Row Spike and Reel 5. The 12” diameter reel consists of nine 3/4” diameter round bars with a chevron shape for smoother Adjustments rotation. The reels have no inner shaft to reduce plugging in wetter conditions. The reels operate 1.
  • Page 149 OPERATION AND MAINTENANCE LEAST TOOTH ANGLE MIDDLE TOOTH ANGLE SPRING SPRING CARRYING CHAIN MOST TOOTH ANGLE ASSEMBLY ASSEMBLY 1-8 HEX NUTS 21-3/4” REEL ASSEMBLY FORWARD PULL CHAIN HARROW ADJUSTMENT PIN BAR CLAMP BAR CLAMP W/TABS FLAT REEL ASSEMBLY SPIKE BAR ASSEMBLY CLEVIS PIN REEL...
  • Page 150 OPERATION AND MAINTENANCE Storage 1. The service life of the Field Cultivator will be extended by proper off-season storage practices. Prior to storing the unit, complete the following procedures: a. Completely clean the unit. b. Inspect the machine for worn or defective parts. Replace as needed.
  • Page 151 Chapter 5 Troubleshooting Guide The Troubleshooting Guide, shown below, is included to help you quickly locate problems that can happen using your 9650 Field Cultivator. Follow all safety precautions stated in the previous sections when making any adjustments to your machine. PROBLEM PROBABLE CAUSE SOLUTION...
  • Page 152 TROUBLESHOOTING GUIDE PROBLEM PROBABLE CAUSE SOLUTION SWEEPS NOT CUTTING, LEAVING Shanks not positioned correctly Check for proper shank placement SKIPS Sweeps not wide enough Use wider sweeps Sweeps set too shallow Increase operating depth Incorrect sweep angle Use 47 degree sweeps Incorrect shank spring adjustment Adjust spring shank.
  • Page 153 Document Control Revision Log: Date Form # Improvement(s): Description and Comments 10/01/2010 F-605 Initial Release 12/07/2018 F-605-1218 Walking beam and Lube Table updates 02/19/2021 F-605-2021 Attachment and shank updates...
  • Page 154 Equipment from Landoll Company, LLC is built to exacting standards ensured by ISO 9001 registration at all Landoll manufacturing facilities. Model 9650 Field Cultivator Operator’s Manual Re-Order Part Number F-605-0221 LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM...

This manual is also suitable for:

96509650-389650-429650-469650-50

Table of Contents