Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
3 Row Spike and Reel Harrow
Installation
See Figures 2-43
-
2-54
Harrow or
See Figures 2-55
placement dimensions in "Standard Specification"
section.
1. Attach the 3 RSD w/spring and 3 RSD w/o spring
(Models 9650-38'-42' only) arm assemblies to the
rear tube of the center and wing frames using harrow
mounting plates, 3/4-10x5-1/2 hex screws, clamp
bushings and 3/4-10 lock hex nut
2. Harrow arms w/o springs are used as the middle
harrow arm on the inner wings.
NOTE
Location of bar clamps with tabs, and position
harrow arm assemblies in the correct locations.
NOTE
The harrow arms with the catch tray hooks are used on
the outer wings with the catch tray hooks toward the
outside of the machine and the catch trays toward the
center of the machine.
See Figures 2-43
Row Spike and Reel Harrow or
3RSD & flat reel and
See Figures 3-22
placement.
3. Refer to Note: spike bar alignment
for proper alignment of spike bar assemblies. Be sure
they are aligned properly on both right and left side of
each section.
4. Attach spike bars to spike harrow arm assemblies
per placement drawings using bar clamps, bar clamp
plates 1/2-13 x 3 hex head cap screws, or bar clamps
w/ tabs, 1/2-13 x 1-1/4 hex head cap screws, and hex
lock nuts.
5. See spring assembly adjustment for initial setting in
"Operating Section".
6. Attach reel assembly or flat reel assembly to 3 RSD
arm assemblies using 5/8-11 u-bolts and 5/8-11 hex
lock nuts.
3-30
for 3 Row Spike and Reel
-
2-66
3RSD & flat reel for
See Figure
-
2-54
for 3
See Figures 2-55
for proper
See Figures 3-22
7. Attach flat bar reels with angled blades as shown
(See Figure
3-22.
8.
See Figures 2-43
Harrow or
placement dimensions of spike harrow arms, spike
-
2-66
bars, and usage of bar clamps or bar clamps w/ tabs.
9. Refer to
"3 Row Spike and Reel Adjustments" on
page 4-22
for spike angle and spring adjustments.
3-21)
Figure 3-21: Flat Reel
-
2-54
for 3 Row Spike and Reel
See Figures 2-55
-
2-66
in "Operation and Maintenance" section
FRONT
3RSD & flat reel
F-605-0221
Advertisement
Table of Contents
