Landoll 9650 FC Operator's Manual page 120

ASSEMBLY INSTRUCTIONS
4 Row Coil Tine Harrow
Installation
Refer to See Figures 2-7
harrow placement.
1. Attach coil tine harrow arms to the rear of the field
cultivator See Figure
dimensions. Clamp bushings are installed on the top
mounting bolts.
NOTE
Harrow arms on the outer wings have harrow stops on
the springs to prevent over extension when folding.
3-24
through 2-18 for 4 ow coil tine
3-18, according to placement
2. Assemble the coil tine assemblies to the harrow
arms.
3. Front row tines are assembled with the tines above
the stop bolts to prevent damage when shipping
Figure 3-18 Detail A. Remove front tine bolts and
reinstall, with stop bolts above tines.
4. Refer to the harrow adjustment sections for operation
and settings (See "4 Row Coil Tine Harrow
Adjustments" on page
See
4-16.).
F-605-0221