Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Landoll Manuals
  4. Tiller
  5. 9630 Series
  6. Operator's manual

Landoll 9630 Operator's Manual

Field cultivator
Hide thumbs Also See for 9630:

Advertisement

Quick Links

Download this manual
'
Model 9630
Field Cultivator
Operator's Manual
LANDOLL COMPANY, LLC
1900 North Street
Marysville, Kansas 66508
(785) 562-5381
800-428-5655 ~ WWW.LANDOLL.COM
F-632-1022

Advertisement

loading
Need help?

Need help?

Do you have a question about the 9630 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Landoll 9630

Summary of Contents for Landoll 9630

  • Page 1 ‘ Model 9630 Field Cultivator Operator’s Manual LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM F-632-1022...
  • Page 2 The identification plate, which lists the model number and serial number, is located on the front of the frame. SERIAL NUMBER The serial number is located on the identification plate. The Following information will help decode the 9630 FC serial number 96H2220000 = xxmyysssss QR CODE DECAL...
  • Page 3 DANGER DO NOT operate or perform any maintenance tasks on this equipment until you have completed the following: 1. Receive proper training to operate this equipment safely. 2. Read and understand the operator’s manual. 3. Be thoroughly trained on inspection and repair procedures. Failure to comply with this warning may result in serious injury or possibly death.
  • Page 5 Table of Contents Introduction and Safety Information Understanding Safety Statements ....... . 1-2 Decal Safety .
  • Page 6 TABLE OF CONTENTS Depth Stop Adjustment ........4-9 LED Light Operation.
  • Page 7 Introduction and Safety Information The Landoll Model 9630 Field Cultivator is a quality product designed to give years of trouble free performance. By following each section of this manual, your system will perform as designed for you and your operation.
  • Page 8 5. Use a locking-style hitch pin that properly fits the The safety statements contained in this manual relate to tractor drawbar and the implement hitch. Lock the the operation of the Model 9630 Field Cultivator. tractor drawbar in the center position to prevent loss of steering control.
  • Page 9 TABLE OF CONTENTS High Pressure Fluid Safety 6. Attach the safety chain to the tractor recommended drawbar support. Provide only enough slack in the 1. Escaping fluid under pressure can be nearly invisible chain for turning. Do not attach the safety chain to an and have enough force to penetrate the skin causing intermediate support.
  • Page 10 TABLE OF CONTENTS Tire Safety Safety Chain 1. Tire changing can be dangerous and should be 1. Use a chain with a strength rating equal to or greater performed by trained personnel using correct tools than the gross weight of towed machinery, which is and equipment.
  • Page 11 Safety Decals and Reflectors New safety signs may be ordered from your Landoll dealer. Refer to this section for parts and proper safety The 9630 Field Cultivator is equipped with all safety signs sign placement. installed for safe operation. To Install new safety signs: For you safety: 1.
  • Page 12 TABLE OF CONTENTS P/N 144193 SIS 20MPH Front of center frame, middle QTY. 1 P/N 2-573-010037 Danger: Folding wing Front side, front hinge plate, center frame, both sides QTY. 2 P/N 2-573-010037 Danger: Folding wing Back side, rear hinge plate, center frame, both sides QTY.
  • Page 13 TABLE OF CONTENTS P/N 528934 Yellow Reflector Left front, center frame, both sides QTY. 2 P/N 528934 Yellow Reflector Left front, amber light bracket, both sides QTY. 2 P/N 528934 Yellow Reflector Left rear, center lift plate, both sides QTY. 2 P/N 528938 Orange Reflector Back side, light brackets, top, both sides...
  • Page 14 TABLE OF CONTENTS P/N 528933 Red Reflector Back side, light brackets, bottom, both sides QTY. 4 P/N 224589 SIS 20 mile/h Back side of SIS 20MPH mount plate QTY. 1 P/N 528938 SMV Emblem Back side, SMV mount plate QTY. 1 P/N 528934 Yellow Reflector Left side, rear tow hitch, both sides...
  • Page 15 10 days of purchase or lease, in as to be able to follow the suggestions made. Please take order to be on file at Landoll and eligible for Warranty. time to understand the proper maintenance schedule and SAFE operation of your equipment.
  • Page 16 1) subjected to or operated in a manner which, at any time, have exceeded the product design limits: 2) repaired or altered outside our factory in any way so as, in the judgment of Landoll Company, LLC , to affect its stability or reliability: 3) subject to misuse, negligence, accident, or has been operated in a manner expressly prohibited in the instructions;...
  • Page 17 This exclusive remedy shall not be deemed to have failed of its essential purpose so long as Landoll Company, LLC is willing and able to repair or replace defective parts in the prescribed manner.
  • Page 18 TABLE OF CONTENTS General Torque Specifications (rev. 4/97) TORQUE SPECIFIED IN FOOT POUNDS This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and cap-screws assembled without supplemental lubrication (as received condition).
  • Page 19 TABLE OF CONTENTS Hydraulic Fitting Torque Specifications TORQUE IS SPECIFIED IN FOOT POUNDS- 37 JIC, ORS, & ORB (REV. 10/97) This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition).
  • Page 20 TABLE OF CONTENTS Model Specifications 9630 Field Cultivator 9630- Model Number 9630-20 9630-24 9630-28 9630-30 9630-32 9630-34 30NC Working Width 20’-6” 24’-6” 28’-6” 30'-6” 30'-6” 32'-6” 34'-6” Transport Width 16’-0” 15’-6” 15’-1” 15’-1” 17’-2” 17’-4” 17’-4” Transport Height 9’-3” 11’-1”...
  • Page 21 TABLE OF CONTENTS Table provided for general use. NOTES:...
  • Page 22 TABLE OF CONTENTS Figure 2-2: Shank Placement LH (20' Model) F-632-1022...
  • Page 23 TABLE OF CONTENTS Figure 2-3: Shank Placement RH (20' Model)
  • Page 24 TABLE OF CONTENTS Figure 2-4: Shank Placement LH (24' Model) 2-10 F-632-1022...
  • Page 25 TABLE OF CONTENTS Figure 2-5: Shank Placement RH (24' Model) 2-11...
  • Page 26 TABLE OF CONTENTS 30’ NC MODEL 28’ MODEL Figure 2-6: Shank Placement LH (28’ and 30'NC Models) 2-12 F-632-1022...
  • Page 27 TABLE OF CONTENTS 30’ NC MODEL 28’ MODEL Figure 2-7: Shank Placement RH (28’ and 30'NC Models) 2-13...
  • Page 28 TABLE OF CONTENTS 32’ MODEL 7-3/4 30’ MODEL 34’ MODEL Figure 2-8: Shank Placement LH (30’, 32’, and 34' Models) 2-14 F-632-1022...
  • Page 29 TABLE OF CONTENTS 32’ MODEL 7-3/4 30’ MODEL 34’ MODEL Figure 2-9: Shank Placement RH (30’, 32’, and 34' Models) 2-15...
  • Page 30 TABLE OF CONTENTS NOTE: REAR FOLD CYLINDERS NOT USED ON 20’ - 24’ MODELS 13-1/2 13-1/2 16-3/4 16-3/4 SMV BRACKET (ATTACHES TO CENTER OF FOLD CYLINDER REAR MOUNT) Figure 2-10: Light and SMV Bracket Placement (All Models) 2-16 F-632-1022...
  • Page 31 TABLE OF CONTENTS NOTE: RIGHT SIDE SHOWN - LEFT SIDE FRONT GAUGE WHEEL PLACEMENT USES SAME DIMENSIONS. 10-1/2 Figure 2-11: Front Gauge Wheel Placement 2-17...
  • Page 32 TABLE OF CONTENTS 14” 3” 23” 23” 2-1/4” 18-9/16” 3-1/4” 6-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 8 INCH 7 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-12: 4 Row Coil Tine Harrow Placement LH (20' Model) 2-18 F-632-1022...
  • Page 33 TABLE OF CONTENTS 23” 23” 3” 14” 3-1/4” 6-7/16” 15-3/8” 5-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 8 INCH 5 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-13: 4 Row Coil Tine Harrow Placement RH (20’ Model) 2-19...
  • Page 34 TABLE OF CONTENTS 14-1/2” 14-1/2” 14-1/2” 9-1/2” 2-3/4” 10-15/16” 2-3/4” 5-15/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 8 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-14: 4 Row Coil Tine Harrow Placement LH (24' Model) 2-20 F-632-1022...
  • Page 35 TABLE OF CONTENTS 14-1/2” 14-1/2” 9-1/2” 14-1/2” 2-3/4” 5-15/16” 7-3/4” 5-15/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 8 INCH 6 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-15: 4 Row Coil Tine Harrow Placement RH (24’ Model) 2-21...
  • Page 36 TABLE OF CONTENTS 15” 19” 13” 13” 3-1/4” 9-1/4” 12-7/16” 12-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 8 INCH 9 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-16: 4 Row Coil Tine Harrow Placement LH (28' Model) 2-22 F-632-1022...
  • Page 37 TABLE OF CONTENTS 13” 13” 19” 15” 9-1/4” 12-7/16” 9-1/4” 6-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 9 TINE 8 INCH 7 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-17: 4 Row Coil Tine Harrow Placement LH (28’ Model) 2-23...
  • Page 38 TABLE OF CONTENTS 14-1/2” 9-1/2” 14-1/2” 14-1/2” 10-3/4” 10-15/16” 2-3/4” 5-15/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 8 INCH 8 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-18: 4 Row Coil Tine Harrow Placement LH (30’NC Model) 2-24 F-632-1022...
  • Page 39 TABLE OF CONTENTS 14-1/2” 14-1/2” 9-1/2” 14-1/2” 2-3/4” 5-15/16” 7-3/4” 13-15/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 8 INCH 8 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-19: 4 Row Coil Tine Harrow Placement RH (30’NC Model) 2-25...
  • Page 40 TABLE OF CONTENTS 16” 8” 20” 20” 8-1/4” 13-7/16” 4-1/4” 7-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 8 INCH 9 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-20: 4 Row Coil Tine Harrow Placement LH (30' Model) 2-26 F-632-1022...
  • Page 41 TABLE OF CONTENTS 20” 20” 8” 16” 4-1/4” 7-7/16” 10-1/4” 11-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 9 TINE 8 INCH 8 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-21: 4 Row Coil Tine Harrow Placement RH (30’ Model) 2-27...
  • Page 42 TABLE OF CONTENTS 12-1/2” 8” 20” 20” 4-3/4” 13-7/16” 4-1/4” 7-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 8 INCH 9 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-22: 4 Row Coil Tine Harrow Placement LH (32' Model) 2-28 F-632-1022...
  • Page 43 TABLE OF CONTENTS 20” 20” 8” 12-1/2 4-1/4” 7-7/16” 10-1/4” 7-15/16 NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 9 TINE 8 INCH 8 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-23: 4 Row Coil Tine Harrow Placement RH (32’ Model) 2-29...
  • Page 44 TABLE OF CONTENTS 5” 8” 20” 20” 9-1/4” 5-7/16” 12-1/4” 15-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 9 TINE 8 INCH 10 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-24: 4 Row Coil Tine Harrow Placement LH (34' Model) 2-30 F-632-1022...
  • Page 45 TABLE OF CONTENTS 20” 20” 8” 5” 12-1/4” 15-7/16” 2-1/4” 12-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 8 INCH 9 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-25: 4 Row Coil Tine Harrow Placement RH (34’ Model) 2-31...
  • Page 46 TABLE OF CONTENTS 14” 3-1/8” 23” 23” 3-3/4” 17-1/8” 4-3/4” 4-7/8” 20-1/4” 29-1/4” 18-1/8” 18-1/8” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75”...
  • Page 47 TABLE OF CONTENTS 23” 23” 3-1/8” 14” 4-3/4” 4-7/8” 17” 3-7/8” 18-1/8” 18-1/8” 29-1/4” 20-1/4” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 5 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105”...
  • Page 48 TABLE OF CONTENTS 15" 9-1/8" 23" 23" 4-13/16" 9-1/16" 12-13/16" 12-15/16" 19-3/4" 21-5/8" 25-5/8" 25-5/8" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 3 ROW 8 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 90”...
  • Page 49 TABLE OF CONTENTS 23" 23" 9-1/8" 15" 12-13/16" 12-15/16" 8-15/16" 4-15/16" 25-5/8" 25-5/8" 21-5/8" 19-3/4" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 120”...
  • Page 50 TABLE OF CONTENTS 15" 19" 13" 13" 4-3/4" 10-7/8" 10-3/4" 10-15/16" 18-1/4" 39" 8-1/8" 8-1/8" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 9 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 120”...
  • Page 51 TABLE OF CONTENTS 13" 13" 19" 15" 10-3/4" 10-15/16" 10-3/4" 4-7/8" 8-1/8" 8-1/8" 39" 18-1/4" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 9 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105”...
  • Page 52 TABLE OF CONTENTS 13" 9" 23" 23" 10-3/4" 8-7/8" 12-3/4" 12-7/8" 23-3/4" 21-1/2" 25-5/8" 25-5/8" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 3 ROW 8 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 120”...
  • Page 53 TABLE OF CONTENTS 23" 23" 9" 13" 12-3/4" 12-7/8" 8-3/4" 10-7/8" 25-5/8" 25-5/8" 21-1/2" 23-3/4" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 3 ROW 8 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 120”...
  • Page 54 TABLE OF CONTENTS 19" 9-1/8" 13" 8-1/4" 8-1/4" 13" 4-3/4" 5" 6-3/4" 6-7/8" 20-5/8" 15-3/4" 21-1/2" 13-1/2" 13-1/2" 21-1/2" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 10 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105”...
  • Page 55 TABLE OF CONTENTS 13" 8-1/4" 8-1/4" 13" 9-1/8" 19" 6-3/4" 6-7/8" 5-1/4" 4-7/8" 21-1/2" 13-1/2" 13-1/2" 21-1/2" 15-3/4" 20-5/8" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75”...
  • Page 56 TABLE OF CONTENTS 13" 19" 3-1/4" 8-1/4" 6-3/4" 6-7/8" 5" 4" 22-1/8" 18-1/8" 19-1/4" 6" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 5 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105”...
  • Page 57 TABLE OF CONTENTS 8-1/4" 3-1/4" 19" 13" 7-1/2" 5-3/16" 6-3/4" 6-7/8" 21" 19-1/4" 18-1/8" 22-1/8" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 90”...
  • Page 58 TABLE OF CONTENTS 3-1/4" 3-1/4" 19" 3-1/4" 8-1/4" 13" 6-7/8" 5" 4" 27-5/16" 18-1/8" 19-1/4" 6" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 3 ROW 5 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 120”...
  • Page 59 TABLE OF CONTENTS 3-1/4" 3-1/4" 19" 3-1/4" 8-1/4" 13" 6-7/8" 5" 4" 27-5/16" 18-1/8" 19-1/4" 6" NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 3 ROW 5 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 120”...
  • Page 60 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 2-7/8" 3-1/2" 13-3/4" 9-1/2" 13-3/4" 7TH HOLE** 5TH HOLE 13TH HOLE 9TH HOLE 5TH HOLE 7TH HOLE** 11TH HOLE...
  • Page 61 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-3/4" 9-1/2" 13-3/4" 3-1/2" 2-7/8" 13TH HOLE 9TH HOLE 9TH HOLE 3RD HOLE 11TH HOLE 11TH HOLE 7TH HOLE**...
  • Page 62 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE SPIKE HOLES. (P/N 186200) 8-5/8" 13-3/8" 8" 12-3/4" 12-3/4" 12TH HOLE** 10TH HOLE 15TH HOLE 11TH HOLE 10TH HOLE 12TH HOLE** 13TH HOLE...
  • Page 63 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 8-5/8" 12-3/4" 12-3/4" 8" 13-3/8" 15TH HOLE 11TH HOLE 14TH HOLE 8TH HOLE 13TH HOLE 13TH HOLE 12TH HOLE**...
  • Page 64 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-1/8" 8-7/8" 8-7/8" 13-3/4" 8-1/2" 13-3/4" 11TH HOLE 13TH HOLE 13TH HOLE 9TH HOLE 15TH HOLE 11TH HOLE 11TH HOLE...
  • Page 65 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-3/4" 8-1/2" 13-3/4" 8-7/8" 8-7/8" 13-1/8" 9TH HOLE 17TH HOLE** 13TH HOLE 7TH HOLE** 11TH HOLE 11TH HOLE 15TH HOLE...
  • Page 66 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 2-5/8" 9-1/4" 8-5/8" 12-3/4" 8-5/8" 12-3/4" 15TH HOLE 13TH HOLE 10TH HOLE 11TH HOLE 13TH HOLE 11TH HOLE 12TH HOLE**...
  • Page 67 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 12-3/4" 8-5/8" 12-3/4" 8-5/8" 9-1/4" 2-5/8" 15TH HOLE 11TH HOLE 14TH HOLE 9TH HOLE 13TH HOLE 13TH HOLE 12TH HOLE**...
  • Page 68 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE SPIKE HOLES. (P/N 186200) 3-3/8” 8-3/16” 9-5/8” 14” 8” 7TH HOLE 12TH HOLE 14TH HOLE 5TH HOLE 5TH HOLE 14TH HOLE 12TH HOLE...
  • Page 69 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 8” 14” 9-5/8” 8-3/16” 3-3/8” 14TH HOLE 10TH HOLE 16TH HOLE 3RD HOLE 12TH HOLE 12TH HOLE 14TH HOLE...
  • Page 70 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 2-5/8” 9-3/16” 8-5/8” 14” 8” 11TH HOLE 12TH HOLE 14TH HOLE 5TH HOLE 9TH HOLE 14TH HOLE 7TH HOLE...
  • Page 71 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 8” 14” 8-5/8” 9-3/16” 2-5/8” 14TH HOLE 10TH HOLE 16TH HOLE 7TH HOLE 12TH HOLE 12TH HOLE 14TH HOLE...
  • Page 72 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 9-1/4” 9-5/8” 3-1/4” 8” 15TH HOLE 12TH HOLE 8TH HOLE 5TH HOLE 7TH HOLE 13TH HOLE 14TH HOLE 6TH HOLE...
  • Page 73 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 8” 3-1/4” 9-5/8” 9-1/4” 14TH HOLE 4TH HOLE 16TH HOLE 11TH HOLE 12TH HOLE 6TH HOLE 14TH HOLE 13TH HOLE...
  • Page 74 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 3-1/2” 13-3/4” 7-11/16” 13-3/4” 7TH HOLE** 7TH HOLE** 5TH HOLE 13TH HOLE 9TH HOLE** 5TH HOLE 7TH HOLE**...
  • Page 75 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-3/4” 7-11/16” 13-3/4” 3-1/2” 3-1/4” 9TH HOLE 13TH HOLE 9TH HOLE** 3RD HOLE 11TH HOLE 7TH HOLE** 5TH HOLE...
  • Page 76 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-3/8” 8” 12-3/4” 8-5/8” 12-3/4” 12TH HOLE** 10TH HOLE 15TH HOLE** 11TH HOLE 10TH HOLE 13TH HOLE 13TH HOLE...
  • Page 77 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 12-3/4” 8-5/8” 12-3/4” 8” 13-3/8” 15TH HOLE** 11TH HOLE 14TH HOLE 8TH HOLE 13TH HOLE 13TH HOLE 12TH HOLE**...
  • Page 78 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-1/8” 8-7/8” 8-7/8” 13-3/4” 7-11/16” 13-3/4” 11TH HOLE 13TH HOLE 13TH HOLE 9TH HOLE** 9TH HOLE 15TH HOLE 11TH HOLE...
  • Page 79 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-3/4” 7-11/16” 13-3/4” 8-7/8” 8-7/8” 13-1/8” 13TH HOLE 9TH HOLE** 17TH HOLE** 7TH HOLE** 11TH HOLE 11TH HOLE 15TH HOLE...
  • Page 80 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 8” 8” 12-3/4” 8-5/8” 12-3/4” 13TH HOLE 10TH HOLE 15TH HOLE** 11TH HOLE 11TH HOLE 12TH HOLE** 13TH HOLE...
  • Page 81 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 12-3/4” 8-5/8” 12-3/4” 8” 8” 3-1/4” 15TH HOLE** 11TH HOLE 14TH HOLE 9TH HOLE** 13TH HOLE 13TH HOLE 12TH HOLE**...
  • Page 82 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-1/4” 9” 8-7/8” 3-1/4” 10TH HOLE 9TH HOLE 10TH HOLE 7TH HOLE 11TH HOLE 8TH HOLE 8TH HOLE 9TH HOLE...
  • Page 83 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 9” 8-7/8” 13-1/4” 11TH HOLE 6TH HOLE 13TH HOLE 6TH HOLE 9TH HOLE 8TH HOLE 11TH HOLE 8TH HOLE...
  • Page 84 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/4” 9-3/16” 8-5/8” 8” 3-1/4” 11TH HOLE 7TH HOLE 13TH HOLE 5TH HOLE 9TH HOLE 11TH HOLE 9TH HOLE...
  • Page 85 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 18-3/4” 3-1/4” 8-5/8” 9-3/16” 3-1/4” 8TH HOLE 7TH HOLE 9TH HOLE 11TH HOLE 6TH HOLE 11TH HOLE 9TH HOLE...
  • Page 86 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 7-1/4” 13-3/16” 7-3/4” 8” 3-1/4” 6TH HOLE 13TH HOLE 10TH HOLE 5TH HOLE 8TH HOLE 11TH HOLE 8TH HOLE...
  • Page 87 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 18-3/4” 3-1/4” 7-3/4” 13-3/16” 7-1/4” 8TH HOLE 9TH HOLE 6TH HOLE 10TH HOLE 6TH HOLE 11TH HOLE 8TH HOLE...
  • Page 88 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3-1/8” 3-1/2” 13-3/4” 4-1/8” 13-3/4” 7TH HOLE** 7TH HOLE** 5TH HOLE 13TH HOLE 9TH HOLE** 5TH HOLE 7TH HOLE**...
  • Page 89 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-3/4” 4-1/8” 13-3/4” 3-1/2” 3-1/8” 13TH HOLE 9TH HOLE 9TH HOLE** 3RD HOLE 7TH HOLE** 11TH HOLE 5TH HOLE...
  • Page 90 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-3/8” 8” 12-3/4” 5” 12-3/4” 12TH HOLE** 10TH HOLE 15TH HOLE** 11TH HOLE 10TH HOLE 12TH HOLE** 13TH HOLE...
  • Page 91 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 12-3/4” 5” 12-3/4” 8” 13-3/8” 15TH HOLE** 11TH HOLE 14TH HOLE 8TH HOLE 13TH HOLE 13TH HOLE 12TH HOLE**...
  • Page 92 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-1/8” 8-7/8” 8-7/8” 13-3/4” 8-1/2” 13-3/4” 11TH HOLE 13TH HOLE 13TH HOLE 9TH HOLE** 9TH HOLE 15TH HOLE 11TH HOLE...
  • Page 93 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-3/4” 8-1/2” 13-3/4” 8-7/8” 8-7/8” 13-1/8” 13TH HOLE 9TH HOLE** 17TH HOLE** 7TH HOLE** 11TH HOLE 11TH HOLE 15TH HOLE...
  • Page 94 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3” 8” 8” 12-3/4” 8-5/8” 12-3/4” 13TH HOLE 10TH HOLE 15TH HOLE** 11TH HOLE 11TH HOLE 12TH HOLE** 13TH HOLE...
  • Page 95 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 12-3/4” 8-5/8” 12-3/4” 8” 8” 3” 15TH HOLE** 11TH HOLE 14TH HOLE 9TH HOLE** 13TH HOLE 13TH HOLE 12TH HOLE**...
  • Page 96 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 13-1/4” 9” 8-7/8” 3-1/4” 9TH HOLE 10TH HOLE 7TH HOLE 10TH HOLE 11TH HOLE 8TH HOLE 8TH HOLE 9TH HOLE...
  • Page 97 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 8-7/8” 3-1/4” 9” 13-1/4” 11TH HOLE 6TH HOLE 6TH HOLE 13TH HOLE 9TH HOLE 8TH HOLE 11TH HOLE 8TH HOLE...
  • Page 98 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 3” 9-3/16” 8-5/8” 8-3/8” 3-1/4” 7TH HOLE 13TH HOLE 11TH HOLE 5TH HOLE 9TH HOLE 11TH HOLE 9TH HOLE...
  • Page 99 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 8-3/8” 3-1/4” 8-5/8” 9-3/16” 3” 14TH HOLE 7TH HOLE 9TH HOLE 11TH HOLE 12TH HOLE 11TH HOLE 9TH HOLE...
  • Page 100 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 7-1/4” 8-3/16” 7-3/4” 8-3/8” 3-1/4” 10TH HOLE 6TH HOLE 13TH HOLE 5TH HOLE 11TH HOLE 8TH HOLE 8TH HOLE...
  • Page 101 TABLE OF CONTENTS DENOTES USE OF NOTE: FOR PROPER SPIKE HARROW PLACEMENT. BAR CLAMP W/TABS BE SURE TO COUNT BOTH ROUND AND SQUARE (P/N 186200) SPIKE HOLES. 8-3/4” 3-1/4” 7-3/4” 8-3/16” 7-1/4” 14TH HOLE 6TH HOLE 9TH HOLE 10TH HOLE 12TH HOLE 11TH HOLE 8TH HOLE...
  • Page 102 TABLE OF CONTENTS Table provided for general use. NOTES: 2-88 F-632-1022...
  • Page 103 Chapter 3 TABLE OF CONTENTS Assembly Instructions It is very important that your new 9630 Field Cultivator be WARNING properly assembled, adjusted and lubricated before use. Illustrations in this section show proper assembly Do not attempt to lift heavy parts (such as the procedures.
  • Page 104 Attach the rear of the tube assembly to the depth control mount on the top of the center lift Models 9630-30’, 32’ and 34’ place the two center assembly using a 5/8 x 5-1/2 bolt and locknut. Do not...
  • Page 105 ASSEMBLY 5/8 LOCK NUT 5/16 LOCK NUTS CENTER LIFT/FOLD 16 PORT FRAME LT MANIFOLD ASSEMBLY, 1/2 X 3-1/2 BOLT, DETAIL A 1/2 LOCK NUT DETAIL A 2 HOLE PLATE STAND MODELS 9630-20’-28’, 30’NC DETAIL B Figure 3-1: Center Frame Assembly...
  • Page 106 TABLE OF CONTENTS Center Lift Assembly 8. Install the cylinder arms to the bearing housings using 1 x 2-3/4 bolts and 1 lock nuts. 9. Install the two 4x10 cylinders to the cylinder lift arm, IMPORTANT and the center lift assembly with pins provided with Read all safety precautions at the front of the section cylinders.
  • Page 107 TABLE OF CONTENTS LEVELER TUBE LIFT ARM WELDMENT, DEPTH STOP ASSEMBLY, WELDMENT, 1 X 3-1/2 BOLT, 5/8 X 2-1/2 BOLT, 1-1/2” FLANGE 1 LOCK NUT 5/8 LOCK NUT BEARING BEARING CAP WELDMENT, 5/8 X 4 BOLTS, 5/8 LOCK NUTS STAND SHANK/WITH HITCH PIN, SPACER...
  • Page 108 TABLE OF CONTENTS Hitch and Leveling Assembly 7. Slide the hose holder clamp over the 3/8 bolt and loosely start the wing nut on top of the clamp. Hydraulic hoses will be routed through the clamp after IMPORTANT assembly. Read all safety precautions at the front of the section before attempting any of the following procedures.
  • Page 109 TABLE OF CONTENTS LEVELER TUBE WELDMENT, RADIUS ROD ASSEMBLY, 1-1/4 X 7 GR8 BOLT, 1-1/4 LOCK WASHER, 1-1/4 NUT HOSE HOLDER BRACKET, 3/4 X 7 BOLT, 3/4 FLANGE NUT 3/8 X 3-1/2 ALL THREAD, HITCH PIN, 3/8 NUT, HOSE HOLDER CLAMP, GROOVED PIN, WING NUT 1 LOCK NUT GR8...
  • Page 110 See 2-2 and 2-9 NOTE shank placement. Models 9630-20’-24’ uses 2 fold cylinders on front fold 4. Install the 6-bolt tire/wheel assemblies to hub/spindle bracket and Models 9630-28’-34’ uses 2 cylinders on assemblies on the wing lift assembly.
  • Page 111 TABLE OF CONTENTS FOLD BRACKET FOLD CYLINDER HINGE MOUNT, 1-1/4 FLAT WASHERS, FOLD PIN, SLOTTED SPRING PINS STAND FLANGE BEARINGS, 1-1/4 FLAT WASHERS, FOLD PIN, SLOTTED SPRING PINS SHANK/EXTENSION ASSEMBLY HUB/SPINDLE GAUGE WHEEL ASSEMBLY, TIRE/WHEEL ASSEMBLY ASSEMBLY, WHEEL BOLTS SHANK GAUGE WHEEL ASSEMBLY CLAMP PLATE,...
  • Page 112 Restrictors are installed in the rod end of wing 4. Install all fittings and hoses as shown. fold cylinders to prevent uncontrolled dropping of wings. Removal of these restrictors, or Models 9630-20’-24’ See Figure 3-7 through improper installation can result in serious hydraulic lift installation and layout.
  • Page 113 TABLE OF CONTENTS Table provided for general use. NOTES: 3-11...
  • Page 114 3/8” X 168” (9630-24’) LIMIT VALVE 3-3/4 X 10 1/2” X 204” CYLINDER 3/4-16 MALE COUPLER BLUE HOSE WRAP 90° #8 FRONT OF ADAPTER MACHINE 8 PORT MANIFOLD #8 TO #8 ADAPTER DETAIL A Figure 3-7: Hydraulic Lift Installation 9630-20’-24’ 3-12 F-632-1022...
  • Page 115 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS AND HOLE OF BEARING CAP WELDMENTS Figure 3-8: Hydraulic Lift Layout 9630-20’-24’ 3-13...
  • Page 116 90° #8 ADAPTER 9630-30’ NC) ADAPTER 3/8” X 206” (9630-30’-34’) LIMIT VALVE 3-3/4 X 10 CYLINDER 1/2” X 204” (9630-28’ & 9630-30’ NC) 3/4-16 MALE 1/2” X 240” (9630-30’-34’ NC) COUPLER BLUE HOSE WRAP DETAIL A 90° #8 ADAPTER 16 PORT...
  • Page 117 TABLE OF CONTENTS Table provided for general use. NOTES: 3-15...
  • Page 118 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS AND HOLE OF BEARING CAP WELDMENTS Figure 3-10: Hydraulic Lift Layout 9630-28’-34’ LH 3-16 F-632-1022...
  • Page 119 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS AND HOLE OF BEARING CAP WELDMENTS Figure 3-11: Hydraulic Lift Layout 9630-28’-34’ RH 3-17...
  • Page 120 ADAPTER HOSE 4 X 30 90° 1/16” CYLINDER 3/8” X 196” HOSE 3/4-16 MALE YELLOW COUPLER HOSE WRAP FRONT OF 8 PORT MACHINE DETAIL A MANIFOLD 3/4-16 PLUG #8 TO #8 ADAPTER Figure 3-12: Hydraulic Fold Installation 9630-20’-24’ 3-18 F-632-1022...
  • Page 121 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS Figure 3-13: Hydraulic Fold Placement 9630-20’-24’ 3-19...
  • Page 122 90° #8 ADAPTER DETAIL A 16 PORT DETAIL A MANIFOLD #8 TO #8 #8 TO #8 ADAPTER ADAPTER NOTE: FOLD HOSES CONNECT TO REAR PORTS OF 16 PORT 8 PORT MANIFOLD MANIFOLD Figure 3-14: Hydraulic Fold Installation 9630-28’-30’NC 3-20 F-632-1022...
  • Page 123 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS Figure 3-15: Hydraulic Fold Layout 9630-28’-30’NC 3-21...
  • Page 124 90° #8 ADAPTER DETAIL A 16 PORT DETAIL A MANIFOLD #8 TO #8 #8 TO #8 ADAPTER ADAPTER NOTE: FOLD HOSES CONNECT TO REAR PORTS OF 16 PORT 8 PORT MANIFOLD MANIFOLD Figure 3-16: Hydraulic Fold Installation 9630-30’-34’ 3-22 F-632-1022...
  • Page 125 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS Figure 3-17: Hydraulic Fold Layout 9630-30’-34’ 3-23...
  • Page 126 TABLE OF CONTENTS Table provided for general use. NOTES: 3-24 F-632-1022...
  • Page 127 TABLE OF CONTENTS 7-PIN 4-PIN CIRCUIT WIRE COLOR CONN. TOWER GROUND WHITE – WORK LAMPS BLACK LEFT FLASHING YELLOW & TURN – STOP LAMPS RIGHT FLASHING GREEN & TURN TAIL LAMPS BROWN SWITCHED – BLUE POWER (12 V) MAIN WARNING LIGHT HARNESS - WIRING CHART RIGHT RIGHT LEFT...
  • Page 128 1. Attach amber LH and RH light bracket assemblies to Leveling Assembly” on page 3-6.) center frame using 1/2 x 2-1/8 x 3-1/4 u-bolt and lock 10. Attach Landoll decal to back side of rear cylinder nuts See Figure 3-20. Models 9630-20’-30’ NC mount.
  • Page 129 TABLE OF CONTENTS 1/4 X 1-1/2 BOLTS RED AG & LOCK NUT LAMP TAIL LIGHT REFLECTOR ASSEMBLY, MOUNT INCLUDES MOUNT, LED AMBER RED & ORANGE REFLECTOR MAIN HARNESS LIGHT ASSEMBLY RH AG FLASHER CONTROL REAR MODULE HARNESS 1/4 X 1-1/2 BOLTS &...
  • Page 130 TABLE OF CONTENTS NOTE: RUN LIGHT HARNESSES THROUGH ALL HOSE CLAMPS NOTE: SECURE ALONG HYDRAULIC LIGHT HARNESSES HOSES WITH TIES STRAPS TO KEEP CLEAR OF ANY MOVING PARTS NOTE: RUN LIGHT HARNESS THROUGH HOSE CLAMPS NOTE: AG FLASHER MODULE MOUNTS UNDER RH TAIL LIGHT MOUNT NOTE: RUN REAR...
  • Page 131 TABLE OF CONTENTS NOTE: SECURE NOTE: RUN LIGHT HARNESSES LIGHT HARNESSES WITH TIES STRAPS THROUGH ALL TO KEEP CLEAR OF HOSE CLAMPS ANY MOVING PARTS ALONG HYDRAULIC HOSES NOTE: RUN LIGHT HARNESS THROUGH HOSE CLAMPS NOTE: AG FLASHER MODULE MOUNTS UNDER RH TAIL LIGHT MOUNT NOTE: RUN REAR...
  • Page 132 TABLE OF CONTENTS Shank Installation NOTE Spring shank assemblies with frame extensions (front See Figure 2-2 through for shank placement bar) are mounted reversed for narrower shipment. These dimensions. Verify that all shank clamps and extensions shanks must be removed and turned forward for proper are properly installed.
  • Page 133 TABLE OF CONTENTS SPRING SHANK ASSEMBLY 5/8 X 4-11/16 X 5-1/2 U-BOLT, 5/8 FLANGE LOCK NUT 1/2 X 3-1/4 BOLT, 1/2 LOCK NUT 5/8 X 4-11/16 X 4-3/4 U-BOLT, 5/8 FLANGE LOCK NUT 5/8 X 1-3/4 ROUND SPRING SHANK SHANK HEAD SQUARE NECK EXTENSION BOLT, 5/8 FLANGE...
  • Page 134 TABLE OF CONTENTS 4 Row Coil Tine Harrow Installa- 2. Assemble the coil tine assemblies to the harrow arms. tion 3. Front row tines are assembled with the tines above the stop bolts to prevent damage when shipping Refer to See Figure 2-12 through 2-25...
  • Page 135 TABLE OF CONTENTS ANGLE ADJUSTMENT HARROW ADJUSTMENT PIN PLATE GANG BAR MORE LESS PLATE AGGRRESIVE AGGRRESIVE 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (INSTALL BOLT IN INNER BOTTOM HOLE) NOTE: REMVOVE STOP BOLTS AND ROTATE DOWN WITH STOP BOLTS ABOVE TINES 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (INSTALL BOLT IN INNER TOP HOLE)
  • Page 136 TABLE OF CONTENTS 3 Row Coil Tine and Reel Harrow 3. Attach reel assemblies or flat reel assemblies to the reel arm assemblies using 5/8 x 3-11/16 x 4-5/8 Installation u-bolts and 5/8 lock nuts. 4. Attach round bar cheveron reels with cheveron See Figure 2-26 through 2-39...
  • Page 137 TABLE OF CONTENTS 3/4 X 5-1/2 BOLT, HARROW MOUNTING PLATE, 3” CLAMP BUSHING, 3/4 LOCK NUT TINE & REEL ASSEMBLY 3/4 X 5-1/2 BOLT, 3/4 LOCK NUT NOTE: REMOVE STOP BOLTS AND ROTATE DOWN WITH STOP BOLTS ABOVE TINES DETAIL A NOTE: FRONT ROW TINE SHIPPING POSTION DETAIL A...
  • Page 138 TABLE OF CONTENTS 5 Row Spike Harrow Installation 4. Attach spike bars to 5 row spike harrow arm assemblies per placement drawings using bar clamp See Figure 2-40 through 2-53 for 5 Row Spike Harrow plates, spike bar clamp plates, harrow bar mounts, placement dimensions.
  • Page 139 TABLE OF CONTENTS NOTE: SPIKE BAR ALIGNMENT RIGHT SIDE SHOWN 5 ROW SPIKE HARROW ARM 3/4-10 X 9 HEX BOLT, 3/4 LOCK NUT, HARROW ARM CLAMP PLATE, 3/4-10 X 5 HEX BOLT, 3/4 LOCK NUT 1/2-13 X 3 HEX BOLT, LYNCH PIN 1/2 FLANGE LOCK NUT PULL CHAIN...
  • Page 140 TABLE OF CONTENTS 3 Row Spike and Reel Harrow 8. Attach flat bar reels with angled blades as shown See Figure 3-28. Installation See Figure 2-54 2-67 for 3 Row Spike and Reel Harrow See Figure 2-68 2-81 3RSD & flat reel for placement dimensions in “Standard Specification”...
  • Page 141 TABLE OF CONTENTS NOTE: SPIKE BAR ALIGNMENT RIGHT SIDE SHOWN 3 RSD ARM ASSEMBLY 3 RSD ARM W/O SPRING ASSEMBLY 3 RSD ARM W/SPRING ASSEMBLY W/SPRING 3/4 X 5-1/2 BOLT, HARROW MOUNTING PLATE, 3” CLAMP BUSHING, 3/4 LOCK NUT 3/4 X 5-1/2 BOLT, 3/4 LOCK NUT HARROW BAR MOUNT W/TABS...
  • Page 142 Rear Tow Hitch (Option) 6. Attach the front of the tow hitch assembly to the cultivator frame cross tubes using u-bolts and locknuts. Models 9630-20’-30’NC See Figure 3-30 through 3-31 7. Reinstall the rear cylinder fold mount and re-pin the for rear tow hitch installation and layout.
  • Page 143 TABLE OF CONTENTS Table provided for general use. NOTES: 3-41...
  • Page 144 AND HARNESS THROUGH HITCH TUBES 5/8 X 4-11/16 X 4-3/4 U-BOLT & 5/8 LOCK NUT MAIN WIRING HARNESS RIGHT REAR TAIL LIGHT MOUNT REAR TOW TANDEM LIGHT HITCH ASSEMBLY HARNESS LIGHTING MODULE Figure 3-30: Rear Tow Hitch Installation 9630-20’-30’NC 3-42 F-632-1022...
  • Page 145 TAIL LIGHT MOUNT HARNESS ON CENTER FRAME LIGHTING MODULE MAIN WIRING HARNESS NOTE: ROUTING OF TANDEM LIGHT HARNESS REAR TOW HITCH ASSEMBLY NOTE: ROUTING OF HYDRAULIC HYDRAULIC HOSES HOSES TANDEM LIGHT HARNESS Figure 3-31: Rear Tow Hitch Layout 9630-20’-30’NC 3-43...
  • Page 146 AND HARNESS THROUGH HITCH TUBES 5/8 X 4-11/16 X 4-3/4 U-BOLT & 5/8 LOCK NUT MAIN WIRING HARNESS RIGHT REAR REAR TOW TANDEM LIGHT TAIL LIGHT MOUNT HITCH ASSEMBLY HARNESS LIGHTING MODULE Figure 3-32: Rear Tow Hitch Installation 9630-30’-34’ 3-44 F-632-1022...
  • Page 147 TAIL LIGHT MOUNT HARNESS ON CENTER FRAME LIGHTING MODULE MAIN WIRING HARNESS NOTE: ROUTING OF TANDEM LIGHT HARNESS REAR TOW HITCH ASSEMBLY NOTE: ROUTING OF HYDRAULIC HYDRAULIC HOSES HOSES TANDEM LIGHT HARNESS Figure 3-33: Rear Tow Hitch Layout 9630-30’-34’ 3-45...
  • Page 148 TABLE OF CONTENTS Table provided for general use. NOTES: 3-46 F-632-1022...
  • Page 149 DANGER DANGER DANGER DANGER Never allow anyone to ride on the 9630 Field When transporting the unit, place cylinder Cultivator at any time. Allowing a person to ride lockouts in the transport lock position after fully on the machine can inflict serious personal injury extending the cylinders.
  • Page 150 TABLE OF CONTENTS Hydraulic Lift System 1. The rephasing hydraulic lift system contains smaller wing frame cylinders plumbed in series with larger The Field Cultivator is equipped with a rephasing center frame cylinders. It is important that the hydraulic lift system to raise and lower the unit in the field. cylinders be connected in the proper series for the lift system to operate correctly.
  • Page 151 TABLE OF CONTENTS Table provided for general use. NOTES:...
  • Page 152 TABLE OF CONTENTS Hydraulic Fold System 3. The hydraulic fold system is equipped with restrictors in the cylinders to prevent uncontrolled falling of wing The Field Cultivator is equipped with a hydraulic fold frames when folding/unfolding. Removal or improper system to raise and lower the wing frames for narrow assembly of these restrictors can cause the machine transport.
  • Page 153 TABLE OF CONTENTS NOTE: BOTH SIDES ARE EITHER FOLDED OR UNFOLDED DEPENDENT ON OPERATION DETAIL A DETAIL B WING STABILIZER BRACKET MOUNT DETAIL B TRANSPORT LOCK PIN INSTALLED TO SECURE WING WING STABILIZER BRACKET MOUNT DETAIL A TRANSPORT LOCK PIN STORAGE LOCATION WHEN UNFOLDED Figure 4-4: Wing Stabilizer Bracket Locks...
  • Page 154 TABLE OF CONTENTS Transporting 3. When towing combination, maximum equipment ground speed shall be limited to the lowest 1. Check and follow all federal, state, and local specified ground speed of any of the towed requirements before transporting the Field Cultivator. implements.
  • Page 155 TABLE OF CONTENTS Tractor Preparation Leveling (Front-to-Rear) The Landoll 9630 Field Cultivator is designed to be pulled 1. The Field Cultivator hitch is fully adjustable for height by tractor equipped with a double lip or clevis type hitch. so the implement may be set to operate level from If your tractor is not equipped as such, you need to front-to-rear.
  • Page 156 Figure 4-7: Lift Arm Adjustment 4. Measure the same distance on the wing frame. On 9630-28’-34’ models the wing frames are generally set 1” higher than the center frame due to difference in tire diameter. Adjusting the lift arm at the front of each wing frame sets wing frame height.
  • Page 157 TABLE OF CONTENTS Depth Stop Adjustment LED Light Operation 1. The operating depth of the Field Cultivator is 1. Attach the seven-pin plug to the socket at the rear of controlled by a single-point depth stop. The stop is the tractor. The socket must be in good working located at the center front of the machine order, and free of dirt, grease, and corrosion.
  • Page 158 TABLE OF CONTENTS Spring Shank 5/8 X 3 BOLT 1. The Field Cultivator may be equipped with spring 1/8” shanks. The spring shanks feature a 185 lb. point load SPRING PLATE and a 10” trip height to clear field obstructions. Shanks are 5/8 x 1-3/4 heat treated steel.
  • Page 159 TABLE OF CONTENTS Table provided for general use. NOTES: 4-11...
  • Page 160 TABLE OF CONTENTS 4 Row Coil Tine Harrow Adjust- 2. In general tine harrows have better capabilities for handling more residue and wetter conditions. When ments operating the coil tine harrow, a more vertical tine tooth angle will make the harrow more aggressive. A 1.
  • Page 161 TABLE OF CONTENTS 1-8 HEX NUTS ANGLE ADJUSTMENT SPRING PLATE HARROW ADJUSTMENT PIN ASSEMBLY MORE LESS AGGRESSIVE AGGRESSIVE 1-1/32” 22” 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (PLACE BOLT IN INNER BOTTOM HOLE) 1/2 X 1-1/4 RD HEAD SQ GANG BAR NECK SCREW (PLACE BOLT IN INNER PLATE...
  • Page 162 TABLE OF CONTENTS 3 Row Coil Tine and Reel Adjust- 4. Each coil tine harrow may be adjusted for spring pressure as well See Figure 4-14. Raise the tine ments harrow off the ground. Remove the clevis pin from the spring tube and install in a heavy or light setting as 1.
  • Page 163 TABLE OF CONTENTS SPRING ASSEMBLY MORE LESS 1-8 HEX NUTS AGGRESSIVE AGGRESSIVE 1/2” 21-3/4” REEL ASSEMBLY HEAVY CLEVIS PIN LIGHT HARROW ADJUSTMENT PIN CLEVIS PIN HARROW ADJUSTMENT PIN REEL 3 ROW COIL TINE ASSEMBLY ASSEMBLY HARROW ADJUSTMENT HOLES Figure 4-14: 3 Row Coil Tine and Reel Adjustments 4-15...
  • Page 164 TABLE OF CONTENTS 5 Row Spike Harrow Adjust- 2. For the most aggressive spike to action, install the harrow adjustment pin in the forward mounting hole ments over each bar clamp for each spike bar Figure 4-15. This will position the spike teeth to be in 1.
  • Page 165 TABLE OF CONTENTS LEAST MIDDLE MOST CARRYING CHAIN TOOTH ANGLE TOOTH ANGLE TOOTH ANGLE CLEVIS PIN FORWARD PULL CHAIN SPIKE BAR ASSEMBLY BAR CLAMP W/TABS CLEVIS PIN BAR CLAMP Figure 4-15: 5 Row Spike Harrow Adjustments 4-17...
  • Page 166 TABLE OF CONTENTS 3 Row Spike and Reel Adjust- 5. The 12” diameter reel consists of nine 3/4” diameter round bars with a chevron shape for smoother ments rotation. The reels have no inner shaft to reduce plugging in wetter conditions. The reels operate 1.
  • Page 167 TABLE OF CONTENTS LEAST TOOTH ANGLE MIDDLE TOOTH ANGLE SPRING SPRING CARRYING CHAIN MOST TOOTH ANGLE ASSEMBLY ASSEMBLY 1-8 HEX NUTS 21-3/4” REEL ASSEMBLY FORWARD PULL CHAIN HARROW ADJUSTMENT PIN BAR CLAMP BAR CLAMP W/TABS FLAT REEL ASSEMBLY SPIKE BAR ASSEMBLY CLEVIS PIN REEL...
  • Page 168 TABLE OF CONTENTS Storage 1. The service life of the Field Cultivator will be extended by proper off-season storage practices. Prior to storing the unit, complete the following procedures: a. Completely clean the unit. b. Inspect the machine for worn or defective parts. Replace as needed.
  • Page 169 TABLE OF CONTENTS Chapter 5 Maintenance and Lubrication Wheel Bearing Maintenance -- 10. Slide the triple-lip seal to the hub and install the seal in the hub. Triple-Lip NOTE Wheel bearing maintenance should be performed at the beginning of every season of use. Check the wheel The triple-lip seals should point away from the hub to bearings periodically for excessive end play.
  • Page 170 TABLE OF CONTENTS Lubrication 3. Wheel seals, when properly installed, will allow grease to pass without harm to seals. Regular 1. A proper maintenance schedule will insure a long lubrication will extend service life, particularly in operating life and peak performance. Performing the severe operating conditions.
  • Page 171 TABLE OF CONTENTS Figure 5-2: Lubrication Points LUBRICATION TABLE INTERVAL ITEM DESCRIPTION NO. OF LUBE POINTS (Hours Unless Stated) Radius Rod Gauge Wheel Hubs 1 each Wheel Hubs 1 each Walking Beam 1 each Lube all points with high grade multi-purpose grease. Table 5-1: Lubrication Table...
  • Page 172 TABLE OF CONTENTS Table provided for general use. NOTES: F-632-1022...
  • Page 173 Troubleshooting Guide The Troubleshooting Guide, shown below, is included to help you quickly locate problems that can happen using your 9630 Field Cultivator. Follow all safety precautions stated in the previous sections when making any adjustments to your machine. PROBLEM...
  • Page 174 TABLE OF CONTENTS PROBLEM PROBABLE CAUSE SOLUTION SWEEPS NOT CUTTING, LEAVING Shanks not positioned correctly Check for proper shank placement SKIPS Sweeps not wide enough Use wider sweeps Sweeps set too shallow Increase operating depth Incorrect sweep angle Use 47 degree sweeps Incorrect shank spring adjustment Adjust spring shank.
  • Page 175 Document Control Revision Log: Date Form # Improvement(s): Description and Comments 10/01/2010 F-632 Initial Release 12/04/2018 F-632-1218 Walking beam, Lube Table update 02/10/2021 F-632-0221 Updated attachments 02/10/2021 F-632-0221 Added safety decals, SIS 20mph decal, QR code decal, 10/11-2022 F-632-1022 Updated frame, hydraulic, electrical, lubrication drawings, added rear SIS 20mph emblem.
  • Page 176 Equipment from Landoll Company, LLC is built to exacting standards ensured by ISO 9001 registration at all Landoll manufacturing facilities. Model 9630 Field Cultivator Operator’s Manual Re-order Part Number F-632 LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM...