Installation
3.6.5 Wi-Fi (option)
The communication module supports the inverter to communicate with devices
(such as smartphones, tablets, etc.) via Wi-Fi.
The Wi-Fi module consists of an assembly with a PCB, a plastic carrier, and an
antenna. It can be connected by plugging into the bottom of chassis.
1. Loosen the self-retaining screws.
2. Remove the cover from the bottom of the chassis.
3. Install the Wi-Fi module by the following torque and tighten the antenna.
①
③
* Screw torque: 0.8 N • m
Figure 3-22: Installation of Wi-Fi module and antenna
②
38