Table of Contents
Advertisement
Troubleshooting/Errors
Error Messages
This section lists all of the errors messages that may occur, and
includes some of the possible reasons for the occurrence of the error
where this may not be so obvious.
Error messages appear on the bottom line of the display, and remain
there for five seconds. They consist of a single letter severity code,
followed by a four digit number and a short message.
For example:
W1234 Check HC lamp selection
The severity codes are:
I
This type of message provides information only, such as prompting
the user to perform some action.
W
Provides information about a system difficulty, or potential difficulty,
which the user should be aware of.
E
A message relating to a condition that will terminate the current
operation. The system will continue to run, but the operation will
have failed.
0804 LIMS port error
A communication error or problem has been identified with the LIMS
(Laboratory Information Management System) via the serial RS-232C
port.
2851 SIPS comms error
There has been a communication problem with the SIPS sample
introduction pump unit. Check all cables to this unit are connected
securely.
122
Information
Warning
Error
Agilent 55B AA Spectrometer User's Guide
Advertisement
Table of Contents
