Advertisement
Available languages
Available languages
NOTE: If you decide not to start the selected programme, please see the "Changing a Programme"
and "Cancelling a Programme" sections.
NOTE: When there is insufficient softening salt, the Salt Lack Warning Indicator (v) will illuminate
to indicate the salt chamber needs filling.
NOTE: When there is insufficient rinse aid, the Rinse Aid Lack Warning Indicator (vi) will
illuminate to indicate the rinse aid chamber needs filling.
Changing the Program
When you want to change the program while a washing program is running on
NOTE: Open the door slightly at first to avoid water spillage if you wish to stop the wash
programme before it is complete
Cancelling the Program
When you want to cancel the program while a washing cycle is running on.
Switching the Machine Off
Open the door and press the
Programme Selection button to
select a new programme.
After closing the door, the new
programme will resume the
course of the old programme
When the door of your machine is
opened, the most recently selected
programme will show on the
display.
Press and hold the Programme
Selection button for 3 seconds. '1' will
be shown on the Display .
The water discharge process will start after the
door of the machine is closed and will continue
for 30 seconds. A buzzer will sound 5 times
when a programme is cancelled.
"00" will be shown on the displaywhen a
p rogramme is complete. A signal will also
sound 5 times. You can then switch your
machine off using the Power On/Off button.
Disconnect the plug and turn
off the water tap.
.
.
EN
47
Advertisement
Chapters
