Table of Contents
Advertisement
4 Product description
4.1 Product overview
3
2
1
TH004 micromanipulator interface VITOM 3D
1
2
3
TH004 mounted on the VITOM 3D
4.2 Possible combinations
It is recommended that the suitability of the products for the planned procedure be checked
prior to use. Please note that the products listed here may not yet be available in all countries
due to differences in approval requirements.
The product can be combined with the following components:
TH004
Instructions for use • Micromanipulator Interface VITOM 3D • MIC912_EN_V1.0_07-2021_IFU_CE-MDR
Base plate with thread for the dovetail connection adaptor from Leica, Zeiss /
Möller-Wedel
Rotating wheel for securing the height adjustment
Screw for fastening the clamping mechanism to the VITOM 3D
Compatible accessories
VITOM 3D (TH200)
VERSACRANE LIGHT (UR300)
ARTIP CRUISE VITOM 3D Set (UR501B,
UR501C)
Product description
Micromanipulator
The following micromanipulator models
were tested in terms of their compatibil-
ity:
Lumenis AcuSpot 712-Z – AC-0020170
Lumenis AcuSpot 712-L – AA3042000
Lumenis AcuSpot 712 – AA2630000
8
Advertisement
Table of Contents
