Siemens SINUMERIK 808D Operating Instructions Manual page 80

PLC sample applications
5.1 PLC sample application (turning)
Table 5- 2
User-defined key 1
User-defined key 2
User-defined key 3
User-defined key 4
User-defined key 5
User-defined key 6
80
Signal
I3.1
I3.2
I3.3
I3.4
I3.5
I3.6
I3.7
I4.0 Handheld unit: axis X selected
I4.1 Handheld unit: axis Y selected
I4.2 Handheld unit: axis Z selected
I4.3 Handheld unit: fourth axis selected
I4.4 Handheld unit: increment X1
I4.5 Handheld unit: increment X10
I4.6 Handheld unit: increment X100
I4.7 Handheld unit: enabled
Q0.0 Working lamp
Q0.1
Q0.2 Tailstock forward
Q0.3 Tailstock backward
Q0.4 Cooling pump
Q0.5 Lubrication pump
Q0.6 Chuck output 1
Q0.7 Chuck output 2
Q1.0 Turret motor rotating clockwise
Q1.1 Turret motor rotating counter-clockwise
Q1.2 Reserved for other types of turrets
Q1.3 Reserved for other types of turrets
Q1.4 Gear shift: low gear level (SBR49: GearChg1_Auto) / Gear
level status (SBR50: GearChg2_Virtual)
Q1.5 Gear shift: high gear level (SBR49: GearChg1_Auto)
Q1.6
Q1.7 Handheld unit valid
Definition of user-defined keys on the MCP
Description
Working lamp
Manual cooling
Manual tool change
Manual chuck clamping and unclamping
Chuck clamping internally/externally
Tailstock
Operating Instructions, 12/2012, 6FC5397-2EP10-0BA0
Remark
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Valid at a high level
Valid at a high level
Valid at a high level
Reserved
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
PLC Subroutines Manual