Siemens SINUMERIK 808D Operating Instructions Manual page 62

Descriptions of the PLC subroutines
3.25 Subroutine 52 - TURRET2_BIN_T (turret with binary coding function)
Table 3- 27
Name
T_cw
T_ccw
Magent
T_LED
ERR1
ERR2
ERR3
ERR4
ERR5
Assigned global variables
T_CURRENT
T_cw_m
T_ccw_m
T_P_INDX
T_DES
T_DIR
T_POS
T_LOCK
T_MAG
Relevant PLC machine data
No.
14510 [20]
14510 [21]
14510 [22]
14512[17].0
62
Outputs
Type Description
BOOL Turret CW rotation output
BOOL Turret CCW rotation output
BOOL Turret clamping output
BOOL Status display during the tool change
BOOL Turret motor overload
BOOL Programmed tool out of turret range
BOOL Wrong setting of the max. tool for the turret
BOOL Not able to find pre-index signal in expected time
BOOL Not able to lock in expected time
VD14000064
M156.0
M156.1
MD160
M164
M168.0
M168.1
M168.2
M168.3
Unit Description
- Max. tool number (4 or 6)
0.1 s Turret clamping time
0.1 s Monitoring time for tool searching
- Activating the turret function of a turning machine
Current tool (retentive data)
Position marking for turret CW rotation
Position marking for turret CCW rotation
Monitoring the tool change buffer zone in the JOG mode
Desired tool number
Direction of adjacent tool change
Turret tool positioning finished
Turret clamping command
Turret magnetic clamping
Operating Instructions, 12/2012, 6FC5397-2EP10-0BA0
PLC Subroutines Manual