superbrightleds EL2-CRW User Manual

Important: Read all instructions prior to installation. SAVE THESE INSTRUCTIONS.
LED Emergency Light

Warning

Read and follow all safety instructions. When using electrical
equipment, basic safety precautions should always be followed
including the following:
• Disconnect power at fuse or circuit breaker before installing
or servicing.
• Do not use outdoors.
• Do not mount in hazardous locations or near gas or electric
heaters.
• Do not let power cords touch hot surfaces.
• Equipment should be mounted at heights and locations
where it is not subjected to tampering by unauthorized
personnel.
• The use of accessory equipment is not recommended.
• Do not use this equipment other than its intended use.
• All services should be performed by qualified personnel.
• Allow battery to charge for 24 hours before first use.

Testing

Manual Test
Test button can be held to illuminate lights for manual testing purposes.

Wiring Diagram

277 VAC
120 VAC
¹Limited 2-year warranty on battery.
EL2-CRW
N
¹

Specifications

Operating Temperature
Fixture Weight
Battery Type
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.

Cautions

Maintenance

• Not required. Replace the batteries as needed according
to ambient conditions. We recommend the equipment be
tested regularly in accordance with local codes.

Operation

• Press the test button, the LED heads will turn on and the
LED indicator will turn off.
• Release the test switch, LED indicator will turn on and the
LED heads will turn off.

Troubleshooting

• Check AC supply, verify the unit has 24 hours of AC supply
before emergency use.
• Verify the unit is shorted or battery is not connected
Battery
-
+
LED 2
LED 1
AC ON TEST
4400 Earth City Expy, St. Louis, MO 63045
User Manual
EL2-CRW
EL2-CRW
32°–104° F (0°–40° C)
0.8 lb (350 g)
Ni-Cd (3.6 V / 900 mAh)
LED
-
+
LED
-
+
Rev Date: V1 05/04/2021
866-590-3533 superbrightleds.com