Battery & Foil Battery Adhesive - Sony XPERIA P LT22i Working Instructions

Replacement
4.8 Battery & Foil Battery Adhesive
Follow the 3.1 – 3.6 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Battery and the new Foil Battery Adhesives.
Carry out the Installation as described below.
Follow the 5.2 – 5.7 Reassembly instructions!
REMOVAL
Carefully pull out the two Foil Battery Adhesives in the
horizontal direction by using your fingers as shown in the
picture.
No tools are allowed!
Make sure the two Foil Battery Adhesives are
completely out!
Be careful so you do not break the Foil Battery
Adhesive!
Remove the Battery.
If the Foil Battery Adhesive is damaged, carefully
remove the Battery by using a Guitar Pick and then
scrap the Battery since it cannot be reused after using a
tool!
1262-6302 Rev 3

Sony Mobile Communications AB – Company Internal
Working Instruction (mech)
20(89)