Problem Areas
1.9
Vibrator
1.9.1 Vibrator not generating alerts
Check:
Inspect the BtB connector of Vibrator to Sub PBA.
Action:
1. If not properly connected – disconnect and reconnect it.
2. If dirty or oxidized – clean it.
3. If the connector or cables of vibrator or vibrator itself is
damaged – replace the Vibrator.
4. If the connector of vibrator on Sub PBA is damaged –
replace the Sub PBA.
Check:
Inspect the BtB connector of Sub PBA to the Main FPC
Assy.
Action:
1. If not properly connected – disconnect and reconnect it.
2. If dirty or oxidized – clean it.
1290-1679 Rev 3
©
Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
25(58)