Personnel Qualification And Training; Consequences And Risks Caused By Non-Compliance With This Manual; Safety Awareness - Delta V3 Installation And Operating Manual

8 of 32 Installation and operating manual
2 Safety
2.3 Personnel qualification and training
All personnel involved must be fully qualified to transport, install, operate,
maintain and inspect the machinery this manual refers to.
The responsibilities, competence and supervision of all personnel involved in
transport, installation, operation, maintenance and inspection must be clearly
defined by the operator.
Deficits in knowledge must be rectified by means of training and instruction
provided by sufficiently trained specialist personnel. If required, the operator can
commission the manufacturer/supplier to train the personnel.
Training on the pump (set) must always be supervised by technical specialist
personnel.
2.4 Consequences and risks caused by non-compliance with this
manual
• Non-compliance with these operating instructions will lead to forfeiture of
warranty cover and of any and all rights to claims for damages.
• Non-compliance can, for example, have the following consequences:
– Hazards to persons due to electrical, thermal, mechanical and chemical
effects and explosions
– Failure of important product functions
– Failure of prescribed maintenance and servicing practices
– Hazard to the environment due to leakage of hazardous substances
2.5 Safety awareness
In addition to the safety information contained in this operating manual and the
intended use, the following safety regulations shall be complied with:
• Accident prevention, health regulations and safety regulations
• Explosion protection regulations
• Safety regulations for handling hazardous substances
• Applicable standards, directives and laws
Delta V3, V4, V6 Submersible Pump