Servicing/Inspection; Drainage/Disposal; Dismantling/Reassembling The Pump Set; Recommended Spare Parts Stock - Delta V3 Installation And Operating Manual

7.2 Servicing/inspection

The pump is practically maintenance-free.
It will suffice to clean the pump once a year and carry out visual inspections of
the condition of the pump and supply line.

7.3 Drainage/disposal

The pump will be automatically drained when it is taken out of the fluid handled.
Always flush and clean the pump before transporting it to the workshop. Provide
a certificate of decontamination for the pump set.
WARNING
7.4 Dismantling/reassembling the pump set
Dismantling/reassembly work must be effected by authorised specialist
personnel only.
NOTE
7.5 Recommended spare parts stock
It is not necessary to keep spare parts on stock.
Delta V3, V4, V6 Submersible Pump
7 Servicing/Maintenance
Fluids, consumables and supplies which are hot or pose a health hazard
Hazard to persons and the environment!
 Collect and properly dispose of flushing fluid and any residues of the fluid
handled.
 Wear safety clothing and a protective mask, if required.
 Observe all legal regulations on the disposal of fluids posing a health hazard.
All maintenance work, service work and installation work can be carried out by Edincare
Pumps or Delta authorised service providers. For contact details please refer to the
enclosed "Addresses" booklet or visit www.edincare.com.
Installation and operating manual 23 of 32