Table of Contents
Advertisement
APMxxxx Series User's Manual
Example of Rx Gain Chart
This page displays the logged Rx Gain values.
Select Test:
Select the Isolation Tests which you desire to display. Available selections are Antenna Isolation, Rx Gain and Tx Rejection.
Select Channels:
Select the test frequencies that you wish to display. Up to five (5) frequencies can be displayed at one time and each selected
frequency will be displayed using a different coloured line.
To selected the frequencies to be displayed, click on a frequency
from the drop down list and, holding down the "Ctrl" key on your computer keyboard, click additional frequencies in the list as
desired. Selected frequencies will be highlighted when selected.
Select Period / Select Date:
Select the past period (working back from the Select Date) for which logged data will be displayed.
When the Select Date field
is selected, a calendar will appear allowing a past date to be nominated as the starting day for the Period to apply up until.
Display:
Clicking the Display button starts the collation of data that meets the selected criteria. Once the data is processed and the
updated chart created, the screen will refresh. This may take a period of time depending on the number of data values that
have been stored that meet the selected criteria.
Note:
The red lines on the displayed graph represent the alarm max/min values currently configured for this test.
Asia Pacific | EMEA | Americas
53
Advertisement
Table of Contents
