Table of Contents
Advertisement
APMxxxx Series User's Manual
IsolationTestStatus
Isolation Test Status Bits
0x0001 Not used.
0x0002 (Antenna Isolation), Rx Gain or Tx Rejection fail.
0x0004 RxA Level out of range (Not used by SNMP).
0x0008 VCO Lock Fail (Not used by SNMP).
0x0010 RxB Level out of range (Not used by SNMP).
0x0020 Not used.
0x0040 RxE Level out of range (Not used by SNMP).
0x0080 Not used.
0x0100 Not used.
0x0200 Not used.
0x0400 RxA Enabled (Not used by SNMP).
0x0800 RxB Enabled (Not used by SNMP).
0x1000 RxE Enabled (Not used by SNMP).
0x2000 RSM Present (Not used by SNMP).
Note:
The axmAlarmSourceNumber is one of 21, 22 or 23 (as detailed in the Syntax Integer declaration for
the axmAlarmSourceNumber object).
Note:
The use of the IsolationTestStatus bits varies between SNMP and Manager Messages. Only bit 0x0002
is used for SNMP. In SNMP, bit 0x0002 will be set whenever there is either an Antenna Isolation, Rx
Gain, or Tx Rejection alarm. The text of the next OID describes the fault, and the values measured.
axmAlarmDescription
OID 1.3.6.1.4.1.32327.2.2.2.1.2.5
Syntax
Description
The following are examples:
Restart: System Restart
SystemStatus:
If a Receive Systems Module is present a "RSM=" status is also added.
ChannelStatus: For a Rx channel: – PWR=OK(-97.5), VCO=OK, RX=ON
CamStatus:
AccessEvent:
IsolTestStatus:
Note that 'A', 'B' and 'E' values are only included if a Receive Systems Module is in use.
Text String
This is a brief textual description of the alarm status. The included detail depends on the alarm type.
SYS=FAIL, RX=OK, TXPWR=OK, TXVSWR=FAIL
If a CAM or SAM is present an "ALMMOD=" status is added.
For a Rx Channel with Receive Systems Module:
- PWR=OK(A=-97.5,B=-95.3,E=-101.2), VCO=OK, RX=ON
For a Tx channel:
- PWR=OK(39.5), ILOSS=OK(1.5), VSWR=OK(1.52),VCO=OK, TX=ON
SAM Input, DI1-6 - Test IP-6, STATUS=FAIL
System Access Lockout Alert, Source=10.3.5.119, Count=3
For Antenna Isolation:
– Ant Isolation,STATUS=OK(A=82.0,B=83.1,E=78.7 dB,900.000000 MHz)
For Rx System:
- Rx System,STATUS=OK(A=-0.1,B=-0.4,E=-1.3 dB,870.000000 MHz)
For Tx Rejection:
- Tx Rejection,STATUS=OK(A=95.1,B=97.8,E=91.4 dB,915.000000 MHz)
Asia Pacific | EMEA | Americas
See Note below
158
Advertisement
Table of Contents
