Table of Contents
Advertisement
APMxxxx Series User's Manual
An example of CAM/SAM status table is;
Note:
The levels will be reported as +32767 if the respective input is not enabled.
Analog values are applicable only for SAM module.
System status table entry objects (1.3.6.1.4.1.32327.2.2.2.1.3.5.1.1)
Object name
systemIndex
systemStatus
systemState
systemDescription
System states:
1 OK
2 Fail
4 Invalid index
System summary alarm status
System Status Bits
0x0001 Lock detect fail for Receive synthesisers.
0x0002 Lock detect failed for Transmit synthesisers.
0x0004 One or more Tx Power level failures are present.
0x0008 One or more Tx VSWR fails are present.
0x0010 Rx Power level failure is present.
0x0020 System hardware alarms summary. (See Hardware Alarm Bits)
0x0040 Antenna Isolation test failure present.
0x0080 One or more CAM/SAM External or General Purpose Digital Input alarms are present.
0x0100 Rx Summary alarm.
0x0200 Tx Power summary alarm.
0x0400 Tx VSWR summary alarm.
0x0800 Not in use.
0x1000 Not in use.
0x2000 Receive Systems Module alarm.
0x4000 Alarm relay is active. As masked by Alarm Config.
0x8000 Summary alarm LED is active.
Hardware Alarms
Internal 5V rail is out of limit.
Internal hardware failure – SD-Card.
Note:
These are not presented separately, but any Hardware Alarm Bit(s) will set the 0x0020 bit of the (above)
System Status Bits.
OID
1.3.6.1.4.1.32327.2.2.2.1.3.5.1.1.1
1.3.6.1.4.1.32327.2.2.2.1.3.5.1.1.2
1.3.6.1.4.1.32327.2.2.2.1.3.5.1.1.3
1.3.6.1.4.1.32327.2.2.2.1.3.5.1.1.4
Asia Pacific | EMEA | Americas
Syntax
Description
Integer(0..1)
0 - System summary alarm status
1 - System login/access failure attempt
status
Integer(0..65535)
System summary status bits
State corresponding to "System summary
Integer(1,2,4)
alarm status" or "System login/access
status"
Text string
Textual description of the status
166
Advertisement
Table of Contents
