Table of Contents
Advertisement
APMxxxx Series User's Manual
Subnet Mask:
The Stored and Currently In Use network Subnet Mask addresses.
Gateway:
The Stored and Currently In Use network Gateway addresses.
Port 23 Command Line Interface:
Indicates if Port 23 is enabled or disabled for Command Line Interface use.
Email
Summary system status messages:
Indicates if System summary status messages will be sent via email.
Detailed channel status messages:
Indicates if Detailed channel status messages will be sent by email.
SMTP Server IP Address:
The IP address that email messages will be sent to.
SMTP Server Listening Port:
The port number used by the SMTP server.
From Email Address:
The email address that this unit will appear as in email messages.
Destination Email Address(es):
The email address(es) that this unit will send email messages to. (up to 4 addresses may be used)
SNMP
Send Alarm Notifications (Traps):
Indicates if sending SNMP Traps are enabled or disabled.
SNMP GET Requests (Port 161):
Indicates if Port 161 is enabled or disabled for SNMP GET requests.
SNMP Manager IP Address:
The IP address that SNMP northbound Alarm Traps will be sent to. Both a Primary and Secondary address may be used if
required for redundant SNMP server configurations.
SNMP Manager Listening Port:
The port number used by the SNMP Manager. Both a Primary and Secondary address may be used if required for redundant
SNMP server configurations.
Note: SNMP MIB files for the APM are available from RFI.
Asia Pacific | EMEA | Americas
49
Advertisement
Table of Contents
