Table of Contents
Advertisement
APMxxxx Series User's Manual
ChannelStatus
Note:
Rx Status Bits
0x0001 Rx power level fail summary.
0x0002 Rx Antenna isolation loss fail summary.
0x0004 RxA level out of range (Rx-0 only).
0x0008 VCO lock fail.
0x0010 RxB level out of range (Rx-0 only).
0x0020 Any Rx signal still ON/OFF.
0x0040 RxE level out of range (Rx-0 only).
0x0080 RxA signal present.
0x0100 RxB signal present.
0x0200 RxE signal present.
0x0400 RxA enabled.
0x0800 RxB enabled.
0x1000 RxE enabled.
0x2000 RSM Present.
Tx Status Bits
0x01 Tx power level fail.
0x02 Internal use
0x04 VSWR fail.
0x08 VCO lock fail.
0x10 Tx signal present.
0x20 Tx signal still ON/OFF.
0x40 Internal use.
0x80 Rx signal present.
CamStatus
Alarm Module Status Bits
0x0 Alarm not active.
0x1 Alarm active.
Note:
AccessEvent
Access Event Bits
0x0000 (Always)
Note:
Decoded from the following tables is based on determining a Rx or Tx message from the contents
of the rest of the SNMP trap message.
Each trap refers to only one alarm input, as detailed by the axmAlarmSourceNumber and
axmAlarmItemNumber objects.
This trap is only sent when the number of sequential login attempts is ≥ 3.
Asia Pacific | EMEA | Americas
157
Advertisement
Table of Contents
