Table of Contents
Advertisement
APMxxxx Series User's Manual
Act:
An "active" indicator that shows the status of the Last recorded power above threshold value being display.
The three states that may appear are;
The indicator symbol is displayed but is dull – the value shown was not measured in the last measurement cycle.
1.
The indicator symbol is displayed and is lit – the value shown was measured in the last measurement cycle.
2.
The indicator symbol is not displayed – the channel is currently disabled and is not being measured.
3.
Power:
The result of the last valid received signal power level measurement in dBm. This will only be updated if the Rx power is above the
programmed minimum threshold level.
Auto Refresh:
Check this box to enable continuously repeated measurement and status updates. Updates will refresh every 5 seconds.
Uncheck this box to cease continuously repeated updates.
Refresh:
Click this button to manually trigger one measurement and status update cycle.
Note:
The background behind a measurement value is highlighted in colour to indicate its current status.
Green denotes 'no alarm', and Red denotes 'alarm'.
When a Receive Systems Module (RSM) is fitted to the APM, the measured values for the three receive signal paths (RxA, RxB
and RE) are visible in the Status – Rx Channels pages.
Asia Pacific | EMEA | Americas
35
Advertisement
Table of Contents
