Table of Contents
Advertisement
en Basic settings
Basic setting
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
36
Display text Selection
Cn0
Cn0 - Cn1
rc1
rc0 - rc2
rE
Start with
YES
Confirm with
Description
Switch the wireless network
connection on or off.
Level "Cn0" switches the
wireless network connection
off.
This basic setting is not
available until you have con-
nected the appliance with
the Home Connect app.
→ "Home Connect ",
Page 37
Activate or deactivate
→ "Remote Start ",
Page 38.
The following settings are
possible:
¡ With the setting "rc0", the
function is permanently
deactivated.
¡ With the setting "rc1", the
function can be selected
via the
→ "Activating Remote
Start ", Page 38
¡ With the setting "rc2", the
function is permanently
activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 37
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
Open the appliance door.
1.
Press
.
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows Hxx.
a The display shows
button.
.
Advertisement
Table of Contents
