Programme Table - Hanseatic HGU4582D10J7710EI User Manual

Programme table

Select the desired programme using this table.
Programme overview
Automatic programme:
For slightly to heavily soiled
dishes with or without dried-on
food scraps
Intensive:
For dirty pots and pans and
heavily soiled dishes.
Universal:
For soiled dishes, saucepans
and glasses, and lightly soiled
frying pans.
ECO:
The most efficient programme for
normally soiled dishes in terms
5)
of combined energy and water
consumption.
Glass:
For lightly soiled dishes and
glasses.
90-minute programme:
For lightly soiled dishes – Note:
The dishes remain slightly damp.
Short programme:
For slightly soiled glasses and
cups as well as dishes without
dried-on food scraps - Note: As
the dishwashing programme
does not have a drying cycle, the
dishes will remain damp.
The values specified for programmes other than "ECO" are only guide values.
1)
• = Number of cycles
2) The appliance door opens automatically during the drying phase.
The values indicate approximately how many minutes before the programme ends the appliance door
will open automatically (included in the total programme duration).
3) Pre-rinse/Cleaning
4)
The values apply to laboratory conditions; they may vary in day-to-day use.
5)
ECO programme: used to check compliance with EU eco-design regulations; according to DIN EN
60436 with rinse aid setting: 5, setting for the degree of hardness: H3.
Programme table
Programme sequence
1)
● ● ●● ● ● 4/14
●
● ● ●●● ● 4/14 65/60 205 16.3 1.010
10
●
● ● ●● ● 4/14 55/55 175 13.1 0.921
10
●
● ●● ● 4/14 50/50 198
50
●
● ● ●● ● 4/14 50/50 120 13.3 0.910
8
●
● ●● ● 18
5
● ● 12
Page EN-21
Consumption
4)
0.790
45– 80– 9.8–
–
55/60 150 13.1
1.510
9.0 0.674
60/50 90 10.7 1.120
45/45 30 9.9 0.810