Rj-45 Patch Panel 2 Fc Connections - HP ProLiant BL45p User Manual

Each pair of RJ-45 patch panels provides up to four network connections per server blade bay. A server
blade installed in the two bays farthest to the left (from the front view) maps to eight Ethernet connectors,
four connectors per bay. These connectors are located in the bottom two rows of connectors. Each
consecutive server blade maps to eight Ethernet connectors in the next two rows above in a similar
manner.
For RJ-45 patch panel installation and specifications, see the documentation that ships with the
interconnect option.
IMPORTANT: NIC numbering is for mapping purposes only. Actual NIC numbering can vary with server
blade operating systems.
Item
1
2
3
4
5
6
7
8
*This NIC is available only if an optional NIC mezzanine is installed.
NOTE: When RJ-45 patch panels are installed in a server blade enclosure, the patch panel on the left of the
rear view is the B side and the patch panel on the right of the rear view is the A side.

RJ-45 patch panel 2 FC connections

The RJ-45 patch panel 2 provides the same network connections as the first RJ-45 patch panel. In
addition, the front of the RJ-45 patch panel 2 supports FC SAN connectivity through the eight SFP
transceiver cages.
Connectors
NIC for data (default PXE)
NIC for data*
NIC for data
NIC for data*
NIC for data
NIC for data*
NIC for data
NIC for data*
Side
A
A
B
B
A
A
B
B
Setup 21