FIO cable routing
Use the section to understand the cable routing for FIO.
Cable routing for FIO
Note: The illustration shows the cabling scenario for server models with four 3.5-inch front drive bays.
Location of each connector on the front of the server varies by models. For detailed location of front I/O
components for different models, see Front view.
Figure 12. Cable routing for FIO
From
VGA cable
1
LCD external diagnostics handset cable
2
USB cable
3
Front diagnostic panel cable
4
To
VGA connector on the system board
LCD EXT connector on the system board
Front USB connector on the system board
FIO connector on the system board
Chapter 3
.
Internal cable routing
59