Internal Cff Raid/Hba Adapter Replacement; Remove The Internal Cff Raid/Hba; Adapter - Lenovo ThinkSystem SR645 Maintenance Manual

Internal CFF RAID/HBA adapter replacement

Use this information to remove and install the internal CFF RAID/HBA adapter.
Remove the internal CFF RAID/HBA adapter
Use this information to remove the internal CFF RAID/HBA adapter.
About this task
Attention:
• Read Installation Guidelines to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DY1RaWHYM4xDloAwuBQHR0
• Youku:
http://list.youku.com/albumlist/show/id_52339628
Procedure
Step 1. Remove the top cover. See Remove the top cover.
Step 2. Remove any components that may impede access to the internal CFF RAID/HBA adapter.
Step 3. Disconnect all cables from the internal CFF RAID/HBA adapter.
Step 4. Lift the release pin, slightly slide the internal CFF RAID/HBA adapter as shown, and carefully lift it
out of the chassis.
Figure 70. Internal CFF RAID/HBA adapter removal
After you finish
.
Chapter 4 Hardware replacement procedures
165