4.6.4.2 De-Installation Of Wired M-Bus Devices - Landis+Gyr E450 User Manual

32/54

4.6.4.2 De-installation of Wired M-Bus Devices

© Landis+Gyr
If an M-Bus device was already successfully installed, it is possible to de-
install the device from the selected channel by entering the unInSt menu.
After de-installing, the InStaLL display is shown again.
Fig. 4.11 shows the process for de-installation of a wireless M-Bus device
from channel 1. The same procedure applies to any of the 4 available
channels.
Fig. 4.11 De-installation of a wired M-Bus device
D000029326 en g – E450 PLC 1-phase ZCX100Px – User Manual
Installation