Wired M-Bus Communication; 4.6.4.1 Installation Of Wired M-Bus Devices - Landis+Gyr E450 User Manual

Installation
4.6.4

Wired M-Bus Communication

4.6.4.1 Installation of Wired M-Bus Devices

i
D000029326 en g – E450 PLC 1-phase ZCX100Px – User Manual
For a successful installation of an M-Bus device, the meter must be prop-
erly pre-configured. The configuration can be changed with the Landis+Gyr
.MAP110 Service Tool.
Fig. 4.10 shows the process for installation of a wireless M-Bus device to
channel 1. The same procedure applies to any of the 4 available channels.
Fig. 4.10 Installation of a wired M-Bus device
31/54
© Landis+Gyr