Pairing/Unpairing The Headphones With A Bluetooth ® Device - Silvercrest SKHO 50 B2 Operating Instructions Manual

Pairing/unpairing the headphones with a Bluetooth
Before you can use the headphones with the Bluetooth
compatible Bluetooth
♦ Switch on the headphones as described above to activate pairing mode.
Set the Bluetooth
♦
detailed description of how to do this can be found in the operating manual for your
Bluetooth
Select the entry SKHO 50 B2 from the list of devices found on your Bluetooth
♦
playback device and, if required, enter the code 0000 to connect the two devices.
If the pairing is successful, you will hear a rising series of beeps and the operating
7
LED flashes blue twice at 3-second intervals.
To terminate the Bluetooth
♦
on the Bluetooth
6
for about 2 seconds until the operating LED
nately. The headphones are now in pairing mode again.
♦ Alternatively, switch the headphones off as described above to deactivate the
Bluetooth
NOTE
► The next time you turn on the headphones, they will automatically connect to the last
Bluetooth playback device that was connected. If your Bluetooth
®
vice does not automatically reconnect to the headphones, you will have to re-establish
the connection manually. A detailed description of how to do this can be found in the
operating manual for your Bluetooth
If no Bluetooth
►
the headphones switch off automatically.
If there is an existing Bluetooth
►
utes, the headphones switch off automatically.
Ensure that the headphones are no more than 10 metres away from the Bluetooth
►
playback device. Make sure that there are no barriers or electronic devices placed
between them.
As soon as you connect the AUX IN socket
►
Bluetooth
®
function is deactivated and the headphones change to AUX IN mode .
The Bluetooth
from the AUX IN socket
│ GB │ IE
■ 10
®
device.
playback device so that it scans for Bluetooth
®
®
playback device.
connection, either disable the Bluetooth
®
playback device or hold down the Bluetooth
®
®
function.
®
connection can be made within 6 minutes, pairing mode ends and
®
®
function can only be reactivated once you remove the audio cable
8
.
®
function, you must pair them with a
7
®
playback device.
connection but no music playback within 10 min-
8
to the audio cable
®
device
®
devices. A
®
pairing button
flashes orange and blue alter-
®
playback de-
w
, the
SKHO 50 B2
®
®
function
®
w