Handling And Operation; Switching The Headphones On/Off; Wearing The Headphones; Pairing/Unpairing The Headphones With A Bluetooth Device - Silvercrest SKHK 40 A1 Operating Instructions Manual

Handling and operation

Switching the headphones on/off

♦ Press the
the headphones . You will hear a beep and the operating/
charging LED
operating/charging LED
and blue .
The headphones are now in pairing mode .
♦ To switch off the headphones, press the
again for about 2 seconds until you hear a beep and the
operating/charging LED

Wearing the headphones

♦ When putting the headphones on, please note the markings
"R" (right) and "L" (left) on the inside of the adjustable head
band
1
♦ Adjust the headband
and the earpieces
Pairing/unpairing the headphones with a
®
Bluetooth
Before you can use the headphones with the Bluetooth
you must pair them with a compatible Bluetooth
♦ Switch on the headphones as described above to activate
pairing mode .
♦ Set the Bluetooth
Bluetooth
can be found in the operating manual for your Bluetooth
playback device .
♦ Select the entry SKHK 40 A1 from the list of devices found
on your Bluetooth
the code 0000 to connect the two devices . If the pairing
is successful, you will hear a rising series of beeps and the
operating/charging LED
intervals .
■ 10 │ GB │ IE │ NI
button
6
lights up violet for approx . 2 seconds . The
0
.
1
cover your ears .
2
device
playback device so that it scans for
®
devices . A detailed description of how to do this
®
playback device and, if required, enter
®
for about 2 seconds to switch on
then flashes alternately orange
0
goes out .
0
so that it fits your head comfortably
flashes blue twice at 3-second
0
button
6
function,
®
device .
®
SKHK 40 A1
®