Talk-To Function And Transparency Mode - Silvercrest SKHO 50 B2 Operating Instructions Manual

Making a call
♦ Use your smartphone to dial the required telephone number.
The call is automatically transferred to the headphones.
♦ Speak into the microphone
Accepting/ending/rejecting a call
NOTE
► If you are listening to music and receive a call, you will hear the ringtone in the head-
phones and playback is stopped. After finishing the call, playback will be resumed
automatically.
► You can accept/reject calls via the headphones or your smartphone. The sound is
automatically played back through the headphones.
Button
Press 1 x briefly (for incoming call)
Press 1x briefly (during call)
Press and hold for approx. 2 seconds
(for incoming calls)

Talk-to function and Transparency mode

The talk-to function and Transparency mode allow you to adjust the volume of the music
playback to the environment. This allows you to hear conversations and surrounding sounds
without having to remove the headphones.
0
button
1. Press briefly
2. Press again briefly
3. Press again briefly
│ GB │ IE
■ 12
9
on the headphones to make your call.
4
Activate the talk-to function:
You will then hear a short beep and the music will play at
Deactivate the talk-to function and activate Transparency
mode to hear surrounding sounds:
You will hear two short beeps and the music will play at
Deactivate the talk-to function and Transparency mode:
You will hear three short beeps and the music playback will
resume at the previously set volume level.
Function
Accept call
End call
Reject call
Function
a medium volume.
a low volume.
SKHO 50 B2