Preparing The Remote Control; Inserting Batteries; Replacing The Batteries; Cautions About The Use Of Batteries - Tascam CD-200 Owner's Manual

Hide thumbs Also See for CD-200:

Table of Contents

3 − Preparation for Use

Preparing the remote control

1. Open the lid.

2. Confirm +/- polarity, and insert two AA batteries.

3. Close the lid.

NOTE

The batteries are not supplied for Taiwan.

Replace both batteries with new ones when the range of the

remote control becomes short or if the function keys become

unresponsive.

Misuse of batteries could cause them to leak, rupture or

otherwise be damaged. Please read and abide by the precau-

tions on them when using batteries. Also see "CAUTIONS ABOUT

BATTERIES" on page 4.

TASCAM CD-200

• When using other devices controlled by infrared rays, use of

this remote control might operate these devices by mistake.

• Use the remote control within the following range.

Remote sensor

15° 15°

Operation distance

Directly in front: Within 7 meters

15° left or right: Within 7 meters

Table of Contents