Selecting A Track; Skipping To The Next Or Previous Track; Selecting By Track Number; Search Forward And Backward - Tascam CD-200 Owner's Manual

Selecting a track

There are two ways to select a track. You can move (skip) to the
previous or next track, or you can select a track directly by its
track number.

Skipping to the next or previous track

Press a SEARCH Ô/ (Â/¯) key on the main unit or
a search (Ô/Â, ¯/) key on the remote control.
After selecting the track, press the PLAY/READY key on the
main unit or the remote control to start track playback.
Search Ô/
keys
SEARCH Ô/
keys
4 − Playing back CDs

Selecting by track number

Use the numeric keys (0–9) on the remote control to directly set
a track for playback by number.
Track numbers can have up to two digits for audio CDs and up
to three digits for data CDs.
1. Use the remote control numeric keys (0–9) to input the track
number. Input the track number starting with the first digit
as in the example below.
To select track 1:
8
Press the "1" key one time.
To select track 12:
8
Press the "1" key followed by the "2" key.
2. Press the PLAY/READY key on the main unit or the remote
control.
The selected track begins to play.
If you press the STOP key on the main unit or the remote
control, the display stops showing the track number input
and the display returns to its previous state.
NOTE
The numeric keys cannot be used to select a track when in
program or shuffle mode.

Search forward and backward

You can search forward and backward in a track while listening
to it.
1. Play or pause the desired track.
2. Press and hold a SEARCH Ô/ (Â/¯) key on
the main unit or a search (Ô/Â, ¯/) key on the
remote control to start searching forward or backward.
3. Release the key that you are holding to stop searching
and return the unit to the state it was in before searching
(playback or pause).
Numeric
keys
(0 - 9)
17
TASCAM CD-200