Troubleshooting - Revolution 212097 User Manual

• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in the
future.
• Ensure there is enough clearance around the appliance. Place
the appliance in a well-ventilated area.
• Connect the power plug to a suitable electrical wall outlet.
• The power indicator (2) will light up in green. Switch ON the
appliance by setting the temperature control (1) clockwise to
300°C for dry running without food for about 15 ~ 20 minutes.
This is to remove all residues during the manufacturing pro-
cess.
• Let the appliance cool down completely. Clean it before using it
for baking crepe. (See ==> Cleaning and Maintenance)
Note: Due to the manufacturing residues, the appliance may
emit slight odor in the first few cycles.
This is normal and does not indicate any defect or hazard. Make
sure the appliance is well ventilated.
Note: You will need a wooden spreader (4) on hand before start-
ing to cook crepes, because you have to handle quickly while
baking to avoid overcooking the batter.
Operating instructions
• Clean the baking surface with a clean damp cloth before each
use & let dry afterwards.
• Connect the power plug with a suitable electrical outlet. Pow-
er indicator (2) will light up in green to show that it is connect-
ed to the electrical power supply.
• Switch ON the appliance by turning the temperature control
(1) in a clockwise direction to select the required baking tem-
perature.
• Wait for about 15 ~ 20 minutes to let the baking plate heating
up to about 250 ~ 300°C (Max).
• Then, pour a small amount of crepe batter onto the baking
plate with a spoon. Use a wooden spreader (3) to spread it in
circular movements.
Note: Moisten the wood spreader before use. This prevents the
batter from sticking to the spreader (3).
• Allow the crepe to cook on one side until its surface is no
longer liquid visibly. Use a wooden spatula or heat-resistant
plastic spatula (not supplied) to lift one side of the crepe gen-
tly. The crepe should be visibly cooked, may be some in brown.
In this case, the crepe is ready to be flipped.
Note: When you pour the batter onto the hot baking plate, you
might hear some slight cracking noise caused by difference in
temperature. This is normal.
Note: Do not overcook the crepe, or the texture will become
rubbery.The crepe can be cooked quickly under high tempera-
ture. So, it can be flipped within about 2~3 minutes if you select
a suitable temperature.
• Turn the crepe over to other side carefully. It only needs to
cook on the other side for about 30 ~ 40 seconds.
• Carefully remove the crepe from the baking plate. Continue
making more crepes until you ran out of batter. Do not use
hand to touch the crepe as it is still hot.
• If necessary, adjust the temperature by rotating the temper-
ature control.
• Switch OFF the appliance by rotating the temperature control
(1) anti-clockwise direction to 0°C.
Attention! Disconnect the power plug when not in use. Green
indicator (2) will go out. Leave the appliance to cool down com-
pletely before cleaning and storing.
Reset the hi-limiter (thermal cut-out)
Please note that a RESET button located at the bottom of the
appliance (Pic. 2 on page 3).
• Unplug the appliance electrical power outlet.
• Allow the appliance to completely cool down.
• Press the RESET button of the Hi-limiter (thermal cut-out).
You should hear a click sound.
• Plug into the socket and you can use it again.
Cleaning & Maintenance
ATTENTION! Always disconnect the appliance from the elec-
trical mains and cool down before storage, cleaning & main-
tenance.
Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
Cleaning
• Clean the outer surface with a slightly damp cloth or sponge
with some mild soap solution.
• Never use abrasive sponges or detergents, steel wool or
metallic utensils to clean the interior or exterior parts of the
appliance.
Storage
• Before storage, always make sure the appliance has already
been disconnected from the electrical outlet and cooled down
completely.
• Store the appliance in a cool, clean and dry place.
• Never put objects on the baking surface as it may crack.

Troubleshooting

If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
Problems Possible cause
Connected to the Power plug is not
power supply but connected
the power indi- ly to the electrical
cator (2) does not power supply.
light up.
Power indicator (2)
defective.
Hi-limiter (Thermal
cut-out) activates.
The appliance Temperature control
does not heat up (1) defective
but power indica-
Heating element de-
tor (2) light up
fective
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
Possible solution
Check again to make
proper- sure it is connected
properly.
Contact your supplier.
RESET the Hi-limiter
(thermal cut-out). See
"RESET THE HI-LIM-
ITER (THERMAL CUT-
OUT)"
Contact your supplier.
9
GB