Laversab 6300-M3 User Manual page 67

Command Type
PU=n R/W
SU=n R/W
PM=n R/W
SM=n R/W
ER R
L1=n R/W
LM=n R/W
L3=n R/W
L4=n R/W
L5=n R/W
L6=n R/W
KR=n R/W
PF=n R/W
GO W
Description
Read/ Set Pt units as per following:
n units
1 knots
2 mach
3 Pt inHg
4 Qc inHg
5 Pt mb
6 Qc mb
7 mph
8 kmph
9 EPR
Read/ set Ps units as follows:
n units
1 Feet
2 Ps inHg
3 meters
4 Ps mb
Read/Set Pt mode to Measure (1), Leak (2), control (3)
Read/set Ps mode to Measure (1), Leak (2), Control (3)
Read current error ; 0 if no error
Read/set max. knots limit
Read/set min. knots limit
Read/set max mach
Read/set max. altitude
Read/set min. altitude
Read/set max. altitude rate
Read/set knots rate
Read/set current profile point
Command to execute current settings.
60