Chief Menu - BRAVILOR BONAMAT Aurora SINGLE LOW Operating Principle

13.2

Chief menu

In order to get access to the chief menu, press the M key and the volume key in the display and
hold them for 1 second.
The following options and sub-options will now be accessible:
Section CMD
1 Info:
1.1 Machine version:
1.2 BldCfg:
1.3 PdPn:
1.4 PdSn:
1.5 PdFwPn:
1.6 PdFwBld:
2 Counters:
2.1 Total counters:
2.2 Day counters:
2.3 Wfilter vol:
2.4 Wfilter tht:
2.5 Descaling counter:
3 Descaling:
4 Recipe:
4.1 Select recipe:
4.2 Delete recipe:
4.3 Change recipe:
4.4 Create recipe:
4.5 Programme recipe:
4.6 Download recipe:
4.7 Upload recipe:
5 Settings:
5.1 Eco settings:
5.1.1 Temp. settings:
5.1.2 Day setting:
5.1.3 Eco setting
(active/not active):
5.2 Water filter settings:
5.2.1 Wfilter counter (volume):
5.2.2 Wfilter counter (days):
5.3 Descaling settings:
5.3.1 Descaling counter
(volume):
22
Description
Various data concerning version numbers.
Single low, Single high, Twin low of Twin high.
Configuration version.
Product number of the mainboard.
Serial number of the mainboard.
Product number of the firmware.
Firmware build version.
Read the various counter results.
Read the total counters.
Read and reset the day counters.
Read and reset the number of litres water used by the filter.
Read and reset the number of days that the filter has been placed.
Select the brewer left or right with the arrows ◄ or ► (only for the Twin version).
Read the descaling counter.
Descaling programme (see the manual for further information about the descaling
programme).
Various options with respect to the recipes.
Set de default used recipe.
Delete existing recipes.
Adjust existing recipes.
Create recipes by manually entering all variables.
Create recipes by entering certain variables and then making coffee. The waiting
times are set by pressing the display.
Download recipes into the machine by means of an RFID card.
Transfer recipes from the machine to an RFID card.
Various settings, eco, water filter, descale, clean, language, unit, time, download
and upload.
Various eco settings.
Temperature settings in the eco position. This can be set to 10°C or 60°C.
Set the days on which the machine should go to the eco position and also the
enabled and disabled times of the different days.
Eco active/not active.
Various water settings.
Set the maximum number of litres the water filter can use.
Set the maximum number of days the water filter can be used.
Descaling setting.
Set after how many litres the machine needs descaling.