Rfid; Fig.16 Place For Holding The Rfid Card - BRAVILOR BONAMAT Aurora SINGLE LOW Operating Principle

6.

RFID

RFID (Radio Frequency identification) is a wireless system that uses radio frequency and
electromagnetic fields to transfer data, without using any wires or batteries.
Settings and recipes can be transferred from a machine to an RFID card and vice versa. Recipes
and/or settings can be transferred and recipes can be overwritten.
The RFID print is found on the left side of the machine (Fig.16).
For transferring data, hold the RFID card against the machine at the place intended for this.

Fig.16 Place for holding the RFID card

Transferring data can only be done by going to the relevant setting in the programme.
Note:
► If several recipes are transferred at once using an RFID card (bulk recipes), all existing
recipes will be overwritten and be lost.
Before actually overwriting the existing recipes, the display shows a message that needs
confirmation. This message offers the possibility to cancel the overwriting of the existing
recipes.
13