Table of Contents
Advertisement
Section
CMD
6.5
Default factory settings:
6.5.1 Install:
6.5.2 Factory:
6.5.3 Reset all counters:
6.5.4 Language:
6.6
Change code:
6.7
Contact:
7
Contact:
24
Description
Various factory settings.
Reset the machine to the first installation. The temperature and the pump are to be
calibrated again.
Reset the machine to the factory test programme. This resets the machine to the
test programme for the factory.
Attention! This programme must at all times be carried out by an authorised
person.
By entering the wrong settings, the mains can be overloaded and this can even
cause a fire.
Bravilor Bonamat BV does not accept any liability for any damage and/or injury
caused by entering the wrong settings.
Reset all counter positions.
Download/upload/remove a language.
Adjust the code. This code is used for accessing the service menu.
Adjust any contact data.
Read the contact data.
Advertisement
Table of Contents
