Table of Contents
Advertisement
5.4
Programme recipes
There are 2 programmes for programming recipes, being build and program.
BUILD:
When using "build", you can enter all variables yourself.
When all 3 volumes have been programmed, the recipe is saved.
Now coffee can be made using this recipe and you can determine if you like the recipe. After the
recipe has been saved, it can be adjusted in the programme "change recipe".
PROGRAM:
When using "program" coffee will be actually made.
A limited number of settings is to be entered.
These settings are:
• Total quantity of water.
• The quantity of lost water in percentages (this refers to the water that remains behind in the
coffee).
• The temperature of the water.
• The pump speed for dosing.
• Pre-infusion (optional), the volume and the waiting time for this.
• Volume for the pulse brew programme.
The waiting times between the dosings and the drip time are determined by the creator of the
recipe. As soon as the machine has finished dosing, the waiting time starts. The waiting time is
determined by pressing the display and the next dosing will be started, if required.
Any dosing through the bypass will be dosed at the end of this programme.
This dosing through the bypass will with normal use just be given during the waiting times
between the various dosings.
If required, these recipes can be adjusted using the programme "change recipe".
5.5
Adjust recipes
If required, saved recipes can at all times be adjusted using the programme "change recipe".
The various settings can be given a different value.
5.6
Upload/download recipes
Recipes can be uploaded from a machine to an RFID card using "upload" and then you can
download this recipe using "download" to any other Aurora machine.
One single recipe can be uploaded from a machine to an RFID card, but it is also possible to
upload all recipes in one go to an RFID card. The latter is called "bulk recipes".
12
Advertisement
Table of Contents
