Introduction And Safety Regulations; General Information - Zumtobel ONLITE central CPS K Installation Instructions Manual

1 Introduction and safety regulations

1.1 General information

Validity and technical state of this installation instruction
This installation instruction is valid for the following ONLITE central CPS devices:
Type
ONLITE central CPS K (compact station)
ONLITE central CPS H (main station)
ONLITE central CPS U E00 (substation in E0 version)
ONLITE central CPS U E30 (substation in E30 version)
ONLITE central CPS BS (battery cabinet)
ONLITE central CPS BG (battery rack)
ONLITE central CPS Touch PC
ONLITE central CPS Remote Interface
Hardware version: B
Signs and symbols used in the documentation
The following signs and symbols are used in this documentation:
Symbol Description
p One step text instructions in instructions for action are marked with p. The
individual steps of multiple step instructions for action are numbered.
a
Indicates the result for the action step after several action steps. These results
are marked with an a symbol at the beginning of the line.
V
Requirements which need to be checked before operation are highlighted with
V.
Notes are marked with the symbol i.
i
d
Warning notes are marked with the symbol
source of the danger as well as the consequence of the danger.
Warning notes are combined with the following signal words:
Danger: Warns of damage to persons (death or severe injury).
Caution: Warns of damage to persons (death or severe injury) which are
dependent on further actions.
Warning: Warns of material damages.
Order number
22 154 689
22 154 690
22 154 691
22 154 692
22 154 693
22 154 694
22 161 687
22 154 740
d
. Warning notes also contain the
3