Chandling Instructions For Sealed Vent-Regulated Lead Acid Batteries; Safety Instructions - Zumtobel ONLITE central CPS K Installation Instructions Manual

C HANDLING INSTRUCTIONS FOR SEALED VENT-
REGULATED LEAD ACID BATTERIES
C.1

Safety instructions

C.1.1 Electrolyte maintenance / Valve Regulation
The sealed battery blocks are maintenance free only as related to the electrolyte. This
presents a safety hazard and voids the warranty and inevitably leads to the destruction of the
battery. Nevertheless, the battery system requires regular inspections and service (see
chap. C.6 on page 34).
d
Caution
Risk of damage
Do not attempt to remove the vents (valves) from the battery or add water.
C.1.2 Precaution-, safety- & disposal notices
Symbol Description
Observe handling instructions.
Wear full eye protection and protective clothing.
Do not smoke or introduce sparks in the vicinity of the battery.
Danger of Explosion and Fire. Battery systems present a risk of electrical high
short circuit currents. Therefore remove all personal metal objects, use
insulated tools, do not lay metal tools and hardware on top of the batteries,
observe circuit polarities, do not make or break live circuits.
Any gelled or liquid emissions from a VRLA battery is electrolyte which
contains dilute sulphuric acid which is harmful to the skin and eyes; is
electrically conductive; and is corrosive.
If electrolyte contacts the skin, wash immediately and thoroughly with water. If
electrolyte enters the eyes, wash thoroughly for 10 minutes with clean water
or a special neutralising eye wash solution and seek immediate medical
attention.
Individual batteries may be heavy. Exercise care when handling and moving
batteries. Mount on secure surface.
31