Connecting The Onlite Central Cps Remote Interface - Zumtobel ONLITE central CPS K Installation Instructions Manual

3.2 Connecting the ONLITE central CPS Remote Interface

Connection of the ONLITE central CPS Remote Interface (Art. No. 22 154 740) has to be
performed in accordance with the schematic drawing shown below and the plans and
drawings valid for the conditions at the installation site.
d
Danger
Comply with the national regulations and guidelines for indicating and signalling when
using a remote switch or remote indicator for emergency lighting systems.
The ONLITE central CPS Remote Interface is powered by the internal 24 V DC voltage supply
of the ONLITE central CPS system.
d
Caution
Do not use an external 24 V DC voltage supply. Disregarding the instructions may
result in outages of the emergency lighting because the proper communication
between the system components may not be guaranteed.
Connect the ONLITE central CPS Remote Interface as follows:
Block system
ONLITE central CPS
Remote Interface
S5+ S5- Rel5 Rel6 Rel7
1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15
Ö4 C4 S4 Ö5 C5 S5 Ö7 C7 S7 Ö8 C8 S8
Ö6 C6 S6
12