Main Station Cps H - Zumtobel ONLITE central CPS K Installation Instructions Manual

8
2.1.2

Main station CPS H

The following figure shows an ONLITE central CPS H system with two circuit monitored sub
distributions.
1 2 3
(1) Charging unit LE
(2)/(3) Circuit monitored sub distributions S
Flange plate for connection cables
The connection cables are routed into the cabinet through the drillings in the flange plate on
top of the cabinet (see following figure). The flange plate contains rubber bushings for different
cable diameters (8 mm to 44 mm). Each switch cabinet has three flange plates.